OpenTherm binding for the openHAB home automation system

Forum about OpenHAB open Source Home Automation.

Moderator: raymonvdm

OpenTherm binding for the openHAB home automation system

Postby jwspuij » Mon Oct 07, 2013 8:43 am

Hi everyone,

I'm one of the developers of the Z-Wave binding for openHAB. I also started working on an Opentherm Gateway binding for the openHAB home automation system. (http://www.openhab.org). OpenHAB is a very flexible and powerful home automation system with extensive rule and scripting support. My goal is to build the ultimate modulating, Opentherm compatible smart thermostat around. With the help of openHAB I can integrate presence detection, messaging, scheduling, outside temperature readings etc all into a very smart heating system. I'm planning on finishing the binding in a couple of weeks, just before I have to start heating my house ;-)

Anyway, the repo is at: https://github.com/jspuij/openhab/tree/ ... rm-gateway

Right now I have both serial and TCP connections reading and I'm reading the messages. Next task will be decoding them and converting them to events on the OpenHAB event bus. Finally I'll implement the commands (including 4.0 firmware) to be sent to the gateway to start controlling the device.

Best regards,

JwS
jwspuij
Starting Member
Starting Member
 
Posts: 14
Joined: March 2012

Re: OpenTherm binding for the openHAB home automation system

Postby FoRMaTC » Thu Nov 07, 2013 1:10 pm

Hi JwS,

Any update on this?
I'm trilled to put this in openhab

Regards,

Bjorn
FoRMaTC
Member
Member
 
Posts: 89
Joined: September 2008
Location: Netherlands

Re: OpenTherm binding for the openHAB home automation system

Postby Mars » Thu Dec 12, 2013 1:57 pm

Hmmm. Last updates where about 1 month ago according to git.

I hope the author continues his work on this very nice binding!

Or has someone else the knowledge and time to finish this binding??
Mars
Starting Member
Starting Member
 
Posts: 23
Joined: March 2013

Re: OpenTherm binding for the openHAB home automation system

Postby BasVDL » Tue Dec 02, 2014 1:01 am

Is this threat still actual?
I've got the OpenTherm Gateway and it works great with Domoticz, but I want to use it with openHAB. Is there a binding already?
Maybe I need a gateway/translation and connect it via MQTT or REST?
BasVDL
Starting Member
Starting Member
 
Posts: 2
Joined: December 2014


Return to OpenHAB Forum

Who is online

Users browsing this forum: No registered users and 1 guest