Hardware: Toon metering module, "meteradapter"

Forum about Toon hardware, both versions 1 and 2 of Toon

Moderators: marcelr, TheHogNL, Toonz

Eddieb85
Starting Member
Starting Member
Posts: 3
Joined: Sun Feb 04, 2018 8:56 pm

Re: Hardware: Toon metering module, "meteradapter"

Post by Eddieb85 »

Interesting topic.
Can you explain how to make the connection from s0 output to the meteradapter? The s0 output has 2 wires. The connection to the adapter has 3 wires.

Already installed the solar software on the Toon.
EJanus
Starting Member
Starting Member
Posts: 25
Joined: Sun Jan 28, 2018 9:07 pm

Re: Hardware: Toon metering module, "meteradapter"

Post by EJanus »

I hate to say it, but I think you guys are right. Although I found some interesting comments in /qmf/qml/apps/eMetersSettings/EMetersSettingsApp.qml, I'm beginning to think it's hardware related.

I have done some google-ing and noticed that everybody with the same firmware and serial as I have, has Heat or 'Stadsverwarming'. So I think I have to somehow get my hands on a normal meteradapter to test if i can get any Gas-output to my Toon.

Eneco isn't supporting 'Stadsverwarming' anymore so my meteradapter is verry rare! If anyone needs this meteradapter for 'Heat' and would like to make a swap, you van give me an PM.

For now I'm happy that Toon can at least show my actual electric usage.
lxz
Starting Member
Starting Member
Posts: 16
Joined: Mon Nov 13, 2017 12:45 pm

Re: Hardware: Toon metering module, "meteradapter"

Post by lxz »

@EJanus:
Which adapter do you need, do you need a specific serial number / type?
I have an old meter adapter (without P1 smart meter support) collecting dust. If it is the right one for you, I can send it to you..
EJanus
Starting Member
Starting Member
Posts: 25
Joined: Sun Jan 28, 2018 9:07 pm

Re: Hardware: Toon metering module, "meteradapter"

Post by EJanus »

Thank you @lxz, but I have a Iskra 550 AM, so I need a relative new meteradapter with P1 connection.
marcelr
Global Moderator
Global Moderator
Posts: 1153
Joined: Thu May 10, 2012 10:58 pm
Location: Ehv

Re: Hardware: Toon metering module, "meteradapter"

Post by marcelr »

For "Zon op Toon" he will need a 6500-1400-6000 or later (Dual flame/plume red icon at the red 3.5mm jack socket).
Asopus
Starting Member
Starting Member
Posts: 7
Joined: Sat Feb 03, 2018 8:47 pm

ZonOpToon

Post by Asopus »

Hi Folks,

Just bought ZonOpToon (secondhand) for some testing, but it doesn't work. All I get is an - at my solar usage. Also the toon doesn't see that it's connected. What I have done is install the KWH meter, which is flashing a red led. That's looking OK. Connected the KWH cable to the Toon transmitter, a blue light is flashing and in a few seconds it is off. Also "SolarDisplay" and "SolarActivated" are 1. But nothing happends :( What am I missing?

edit marcelr: moved to meteradapter thread.
marcelr
Global Moderator
Global Moderator
Posts: 1153
Joined: Thu May 10, 2012 10:58 pm
Location: Ehv

Re: ZonOpToon

Post by marcelr »

You should checkout the version of your meter adapter.
PN: 6599-1500-0201 or PN: 6500-1400-6000 should work. others probably won't.
User avatar
RdP
Advanced Member
Advanced Member
Posts: 989
Joined: Thu May 04, 2006 10:14 am
Location: Netherlands

Re: ZonOpToon

Post by RdP »

marcelr wrote:You should checkout the version of your meter adapter.
PN: 6599-1500-0201 or PN: 6500-1400-6000 should work. others probably won't.

Hmm

Mine is 6500-1102-0401

See viewtopic.php?f=87&t=11969&start=30 topic. See this could be a problem for me too ?

Any change Eneco wil exchange my adapter? I didn't order ToonZon, but did it myself?

edit marcelr: moved to meteradapter thread.
Rien
marcelr
Global Moderator
Global Moderator
Posts: 1153
Joined: Thu May 10, 2012 10:58 pm
Location: Ehv

Re: Hardware: Toon metering module, "meteradapter"

Post by marcelr »

RdP wrote: Hmm

Mine is 6500-1102-0401

See viewtopic.php?f=87&t=11969&start=30 topic. See this could be a problem for me too ?

Any change Eneco wil exchange my adapter? I didn't order ToonZon, but did it myself?
You can always ask. If the answer is no, there are meter adapters available from MP, every now and then.
Asopus
Starting Member
Starting Member
Posts: 7
Joined: Sat Feb 03, 2018 8:47 pm

Re: Hardware: Toon metering module, "meteradapter"

Post by Asopus »

I have a PN: 6500-1300-7200, so it won't work? :(
marcelr
Global Moderator
Global Moderator
Posts: 1153
Joined: Thu May 10, 2012 10:58 pm
Location: Ehv

Re: Hardware: Toon metering module, "meteradapter"

Post by marcelr »

Asopus wrote:I have a PN: 6500-1300-7200, so it won't work? :(
Nope.
Check out this post:
viewtopic.php?f=87&t=8743&start=255#p79033

It's more to do with the firmware than the actual part number. But for ZonOpToon you will need the adapters with the 0.xx/0.yy version numbers for the firmware.
Asopus
Starting Member
Starting Member
Posts: 7
Joined: Sat Feb 03, 2018 8:47 pm

Re: Hardware: Toon metering module, "meteradapter"

Post by Asopus »

marcelr wrote:
Asopus wrote:I have a PN: 6500-1300-7200, so it won't work? :(
Nope.
Check out this post:
viewtopic.php?f=87&t=8743&start=255#p79033

It's more to do with the firmware than the actual part number. But for ZonOpToon you will need the adapters with the 0.xx/0.yy version numbers for the firmware.
I have the idea of getting a toon subscription for a month or two, would that be sufficient? I than can update Toon (v3 which I'm using now) to V4.x and also the adapter. Would that be a good idea?
Toonz
Forum Moderator
Forum Moderator
Posts: 1871
Joined: Mon Dec 19, 2016 1:58 pm

Re: Hardware: Toon metering module, "meteradapter"

Post by Toonz »

Asopus wrote: I have the idea of getting a toon subscription for a month or two, would that be sufficient? I than can update Toon (v3 which I'm using now) to V4.x and also the adapter. Would that be a good idea?
Probably yes.....
member of the Toon Software Collective
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: Hardware: Toon metering module, "meteradapter"

Post by TheHogNL »

Toonz wrote:
Asopus wrote: I have the idea of getting a toon subscription for a month or two, would that be sufficient? I than can update Toon (v3 which I'm using now) to V4.x and also the adapter. Would that be a good idea?
Probably yes.....
Not sure if you will get a new meteradapter. They will probably only replace it if you also order Zon op Toon. So you will need a (one-time) add-on order for Zon op Toon also. And then they will replace your kWh meter for your solarpanels also. But you can ofcourse try to explain that on the phone with Eneco when you order it.
Member of the Toon Software Collective
Asopus
Starting Member
Starting Member
Posts: 7
Joined: Sat Feb 03, 2018 8:47 pm

Re: Hardware: Toon metering module, "meteradapter"

Post by Asopus »

I'll try it, I have all original parts. Also Zon op Toon, which is original... So why should I replace it? I'll let you know how it went :)
Post Reply

Return to “Toon Hardware”