Home Automation Domotica Forum Europe, Bwired Forum

Did the layout of the screen change at all?

No, and opkg-cache folder is still empty. config_happ_scsync.xm did change tho

OK, so it was FW 3.5.4 after all. Had a quick look yesterday night, 2.5.4 has never been issued as a production release, so you having it on a toon would have been peculiar at least. Anyway, that doesn't solve your problem.

Do you know which item in config_happ_scsync.xml you changed, that got your problem started. Maybe someone else has a working version of that same file.

Yeah i changed <HeatDisplay>0</HeatDisplay> to <HeatDisplay>1</HeatDisplay>, then i saw the warmtemeter instead of gasmeter and when changing back the <HeatDisplay>1</HeatDisplay> to <HeatDisplay>0</HeatDisplay> it didn't display my gasmeter (did saw the measurement tho of the gas usage). So i did a factory reset which resulted in the meteradapter being seen as a repeater. BTW my original non rooted toon, was running the 4.3 software, so perhaps the meteradapter firmware was updated between 3.5.4 and 4.3 which could result in the issue i have

Correct, could well be the case. I'm not sure if a z-wave device can be part of two networks at the same time. Do you have a separate meter adapter for your 3.5.4 toon? If so, try to connect that one and see what it brings.

I did "divorced" the meteradapter from my "old" non rooted toon, else i couldn't "include" the meteradapter to my rooted toon. Sorry didn't read your question totally, no i don't have a separate meteradapter. I used the old one from my non rooted toon.

Possibly there was an adapter connected to your rooted toon previously. Did you remove that one as well?

Yeah, cleared everything

There has been a meteradapter firmware upgrade between 3.5.4 and 4.3.20. Not sure if that is causing your problem.

Well, I will try to connect my non rooted today and include my meteradapter to it. If that solves the issue I will root it. Is the latest software 4.4 still rootable? Because I know there was a software update on that one but didn't bother with updating. That one is still subscribed with eneco

Rootability has to do with the version of the bootloader. FW updates do not have any effect on the bootloader. An update by Eneco WILL, however, overwrite /etc/iptables.conf, and thus disable access through ssh. This is corrected easily, some users just have a 3-wire serial connection attached to their toon, others patch the offending package before installation commences.

I'm trying to Toonify my house and I got 2 of them so far, one is still active and is now monitoring my electricity and gas.
But I don't have a subscription.
So both of my Toon are rooted, and now I am wondering how to get the most out of them.

My first Toon is only showing the Weather and Traffic, but I have not been able to add Plugs or Zwave to it or whatever else it can do?
I don't know what to edit in config_happ_scsync.xml or Globals.qml.

My second Toon is not activated and running 2.10.15, I have no clue how to update this one. There is no Update button next to the version number.
I have still left the openvpn enabled as I thought an update might come through there.

My goal is to:
- Toon 1, measure gas & electricity in the house (smart meter), automatically away if I log of wifi etc...
- Toon 2, show me the weather and traffic before leaving
- Toon 3, measure electricity and temperature in the garage (replace the old meter)

Its been a while since i hacked my toon and due to needed updates i have to hack it again.
the firewall (iptables) is like described in this thread.
But i am not successful in starting/enabling the server behind port 10080
the file /HCBv2/config/hcb_project.xml is not on my toon. (firmware 4.4.21)
now i get 403 errors on toonip:10080/happ_thermstat.

how can i fix this?

sjaakie123 wrote:Its been a while since i hacked my toon and due to needed updates i have to hack it again.
the firewall (iptables) is like described in this thread.
But i am not successful in starting/enabling the server behind port 10080
the file /HCBv2/config/hcb_project.xml is not on my toon. (firmware 4.4.21)
now i get 403 errors on toonip:10080/happ_thermstat.

how can i fix this?

look at the topic i started about updating toon.

The file has been moved since the last update. It is now located in: Edit this file as described in the turorial and you should be good to go.

Edit:
There is an updated tutorial here