issue meteradapter with slimme meter Toon2

Forum about Toon hardware, both versions 1 and 2 of Toon

Moderator: marcelr

issue meteradapter with slimme meter Toon2

Postby dennis071nl » Fri Sep 28, 2018 6:55 pm

Hi guys,

Today one of the heroes got my new Toon 2 rooted, so right now i'm trying to set it up, but finding one problem with my meteradapter.

I'm using the Toon 2 in combination with a slimme meter, which is connected though a P1 cable.

I connect it, in the last configuration step i can only choose electricity. In the end no errors on the Toon itself, but no electricity or gas usage is reported. I found out that in the prductversie section i have the serialnumbers for both main unit and keteadapter, but for meteradapter there are only dashes...

Anybody who can help me out??

Dennis
dennis071nl
Starting Member
Starting Member
 
Posts: 21
Joined: June 2017

Re: issue meteradapter with slimme meter Toon2

Postby Toonz » Fri Sep 28, 2018 8:24 pm

Just an idea : have you tried to remove the meteradapter first and then reconnect when put in a power socket near Toon?
Toonz
Advanced Member
Advanced Member
 
Posts: 718
Joined: December 2016

Re: issue meteradapter with slimme meter Toon2

Postby dennis071nl » Fri Sep 28, 2018 8:56 pm

yeah, apparently there is nothing wrong with the connection: 5 stars...

it says "verbonden"as well...
dennis071nl
Starting Member
Starting Member
 
Posts: 21
Joined: June 2017

Re: issue meteradapter with slimme meter Toon2

Postby TheHogNL » Fri Sep 28, 2018 9:24 pm

Try to reset the meteradapter. Not sure how exactly but i think it is holding the button on the meteradapter for 10 seconds. Then re-add it.
For the first install keep it close to the toon2.

Maybe look in the /qmf/log dir for clues? Or start /qmf/sbin/hdrv_zwave manually to check if there are issue's.
TheHogNL
Member
Member
 
Posts: 446
Joined: August 2017

Re: issue meteradapter with slimme meter Toon2

Postby dennis071nl » Sat Sep 29, 2018 6:20 am

I changed some entities in happ scsync and now all is fine. Thanks for all the help, Topic can be closed!
dennis071nl
Starting Member
Starting Member
 
Posts: 21
Joined: June 2017

Re: issue meteradapter with slimme meter Toon2

Postby TheHogNL » Sat Sep 29, 2018 6:51 am

Ok great.
Probably elecusage and gasusage was still 0 ?
TheHogNL
Member
Member
 
Posts: 446
Joined: August 2017


Return to Toon Hardware

Who is online

Users browsing this forum: No registered users and 1 guest