Meteradaptor unable to connect

Forum about Toon hardware, both versions 1 and 2 of Toon

Moderators: marcelr, TheHogNL, Toonz

Post Reply
jossie67
Starting Member
Starting Member
Posts: 16
Joined: Mon Apr 02, 2018 3:57 pm

Meteradaptor unable to connect

Post by jossie67 »

Hi,

I'm trying the connect the meteradaptor to my Toon.
No connecting, even not at 10 cm.
Is there a way to reset meteradaptor ?
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: Meteradaptor unable to connect

Post by TheHogNL »

yes, in the same menu where you add the adapter, you can choose advanced and then repair/reset the adapter (somehting like that). It is probably registered to another Toon (or old config or something). So it first needs to be de-associated from that using the repair/reset instruction.
Member of the Toon Software Collective
jossie67
Starting Member
Starting Member
Posts: 16
Joined: Mon Apr 02, 2018 3:57 pm

Re: Meteradaptor unable to connect

Post by jossie67 »

I did, and then it is connected,
but when I go back to the home screen, the connect is lost again :o ,
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: Meteradaptor unable to connect

Post by TheHogNL »

jossie67 wrote:I did, and then it is connected,
but when I go back to the home screen, the connect is lost again :o ,
Can you theck the output of your: "http://[toon-ip-address]/hdrv_zwave?action=getDevices.json"
That will show all your zwave devices, like the meteradapter. Maybe there is another meteradapter in there but not registered correctly. You can remove all devices somewhere in an advanced setting. Also check the repeaters-advanced button.
Member of the Toon Software Collective
jossie67
Starting Member
Starting Member
Posts: 16
Joined: Mon Apr 02, 2018 3:57 pm

Re: Meteradaptor unable to connect

Post by jossie67 »

I remove alle devics

this is the output

{"dev_settings_device": {"uuid": "eneco-001-141971:hdrv_zwave_67723C6C675", "name": "settings_device", "internalAddress": "settings_device", "type": "settings_device"}}
jossie67
Starting Member
Starting Member
Posts: 16
Joined: Mon Apr 02, 2018 3:57 pm

Re: Meteradaptor unable to connect

Post by jossie67 »

I found the solution to my issue.
After rooting my Toon, I connected to Zwave antenne on the wrong connector :oops:

this is the wrong connector

Image

Beside the Zware chip is the connector for the Zwave antenne

Image
Post Reply

Return to “Toon Hardware”