issue meteradapter with slimme meter Toon2

Forum about Toon hardware, both versions 1 and 2 of Toon

Moderators: marcelr, TheHogNL, Toonz

Locked
dennis071nl
Starting Member
Starting Member
Posts: 35
Joined: Sat Jun 03, 2017 9:13 pm

issue meteradapter with slimme meter Toon2

Post by dennis071nl »

Hi guys,

Today one of the heroes got my new Toon 2 rooted, so right now i'm trying to set it up, but finding one problem with my meteradapter.

I'm using the Toon 2 in combination with a slimme meter, which is connected though a P1 cable.

I connect it, in the last configuration step i can only choose electricity. In the end no errors on the Toon itself, but no electricity or gas usage is reported. I found out that in the prductversie section i have the serialnumbers for both main unit and keteadapter, but for meteradapter there are only dashes...

Anybody who can help me out??

Dennis
Toonz
Forum Moderator
Forum Moderator
Posts: 1873
Joined: Mon Dec 19, 2016 1:58 pm

Re: issue meteradapter with slimme meter Toon2

Post by Toonz »

Just an idea : have you tried to remove the meteradapter first and then reconnect when put in a power socket near Toon?
member of the Toon Software Collective
dennis071nl
Starting Member
Starting Member
Posts: 35
Joined: Sat Jun 03, 2017 9:13 pm

Re: issue meteradapter with slimme meter Toon2

Post by dennis071nl »

yeah, apparently there is nothing wrong with the connection: 5 stars...

it says "verbonden"as well...
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: issue meteradapter with slimme meter Toon2

Post by TheHogNL »

Try to reset the meteradapter. Not sure how exactly but i think it is holding the button on the meteradapter for 10 seconds. Then re-add it.
For the first install keep it close to the toon2.

Maybe look in the /qmf/log dir for clues? Or start /qmf/sbin/hdrv_zwave manually to check if there are issue's.
Member of the Toon Software Collective
dennis071nl
Starting Member
Starting Member
Posts: 35
Joined: Sat Jun 03, 2017 9:13 pm

Re: issue meteradapter with slimme meter Toon2

Post by dennis071nl »

I changed some entities in happ scsync and now all is fine. Thanks for all the help, Topic can be closed!
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: issue meteradapter with slimme meter Toon2

Post by TheHogNL »

Ok great.
Probably elecusage and gasusage was still 0 ?
Member of the Toon Software Collective
Locked

Return to “Toon Hardware”