Smart Meter P1 Pinout RJ11 to RJ45

Forum about Toon hardware, both versions 1 and 2 of Toon

Moderators: marcelr, TheHogNL, Toonz

Post Reply
Cell
Starting Member
Starting Member
Posts: 7
Joined: Sun Mar 17, 2019 5:11 am

Smart Meter P1 Pinout RJ11 to RJ45

Post by Cell »

My Landis+Gyr E350 smart meter has a P1 RJ45 socket. The Toon meteradapter and cable are RJ11. Is it possible to make an RJ11 to RJ45 adapter cable and if so, how should the pinout/connection be?

Pinout RJ11
Pin: Color:
1 Blue
2 Red
3 Green
4 Yellow

Pinout Landis+Gyr E350 meter
Pin: Function:
1 +5V
2 RTS (Request to Send)
3 GND (Ground)
4 NC (Not Connected)
5 TxD (Transmit data)
6 GND

Would a straight connection using pins 2 to 5 on the RJ45 work? Any ideas?
hvxl
Senior Member
Senior Member
Posts: 1965
Joined: Sat Jun 05, 2010 11:59 am
Contact:

Re: Smart Meter P1 Pinout RJ11 to RJ45

Post by hvxl »

RJ45 has 8 pins. What you describe for your meter are the normal RJ12 (6p6c) connections for a DSMR 4.0 or later meter. These are compatible with the earlier RJ11 (6p4c) pinout. The extra pins only provide power and their use is optional. Toon doesn't use them. This means you can just plug the RJ11 cable that came with the Toon into your smart meter.
Schelte
Post Reply

Return to “Toon Hardware”