I used the update script, chose 4.16.8, and now my toon won't boot.
It stays in a grey screen with a Logo light grey.
Luckely i've got my ssh up again, but when i try the scipt this is my output:
Which version do you want to upgrade to?
4.16.8
Alright, I will try to upgrade to 4.16.8
Now starting the VPN tunnel and waiting for it to be alive and configured...
Now starting the VPN tunnel and waiting for it to be alive and configured...
Now starting the VPN tunnel and waiting for it to be alive and configured...
Now starting the VPN tunnel and waiting for it to be alive and configured...
Now starting the VPN tunnel and waiting for it to be alive and configured...
Now starting the VPN tunnel and waiting for it to be alive and configured...
Could not enable VPN in a normal reasonable time!
DEBUG information:
192.168.178.0/24 dev eth0 scope link src 192.168.178.48
default via 192.168.178.1 dev eth0 metric 10
# <persistent /etc/hosts content from /etc/hosts.template file>
127.0.0.1 ping.quby.nl
# </persistent /etc/hosts content from /etc/hosts.template file>
127.0.0.1 localhost.localdomain localhost eneco-001-071382
172.19.16.1 feed.hae.orig feed
127.0.0.1 feed.hae.int feed
END DEBUG information
Quitting the upgrade. It was a nice try tho...
killall: openvpn: no process killed
soepie78 wrote:I used the update script, chose 4.16.8, and now my toon won't boot.
It stays in a grey screen with a Logo light grey.
Luckely i've got my ssh up again, but when i try the scipt this is my output:
Which version do you want to upgrade to?
4.16.8
Alright, I will try to upgrade to 4.16.8
Now starting the VPN tunnel and waiting for it to be alive and configured...
Now starting the VPN tunnel and waiting for it to be alive and configured...
Now starting the VPN tunnel and waiting for it to be alive and configured...
Now starting the VPN tunnel and waiting for it to be alive and configured...
Now starting the VPN tunnel and waiting for it to be alive and configured...
Now starting the VPN tunnel and waiting for it to be alive and configured...
Could not enable VPN in a normal reasonable time!
DEBUG information:
192.168.178.0/24 dev eth0 scope link src 192.168.178.48
default via 192.168.178.1 dev eth0 metric 10
# <persistent /etc/hosts content from /etc/hosts.template file>
127.0.0.1 ping.quby.nl
# </persistent /etc/hosts content from /etc/hosts.template file>
127.0.0.1 localhost.localdomain localhost eneco-001-071382
172.19.16.1 feed.hae.orig feed
127.0.0.1 feed.hae.int feed
END DEBUG information
Quitting the upgrade. It was a nice try tho...
killall: openvpn: no process killed
Just had a chance to look wat was wrong with your Toon.
After starting qt manually (/usr/bin/startqt) it immediatly stopped with message 'drawables.rcc' not found.
It seemed that the symbolic links in /qmf/qml towards the rcc files where missing. Not sure yet how this is possible as I am currently unaware when these links are made during the upgrade to 4.16.8
However, it was easily fixed using these commands:
Ok, just found where these links normally are created.
In /qmf/bin/qmf-tenantize.sh, which is started just after a upgrade, the tenant version (in most of our cases Eneco) is checked and then the correct resource file is linked (base or Electrabel for Boxx devices).
So, running /qmf/bin/qmf-tenantize.sh again should have fixed your issue also. Probably the update went wrong somewhere causing this not to run.
After a long time I decided it was time to upgrade my Toon by the script. As suggested I first upgraded to 4.10.6, which was succesfull!
I then upgraded to 4.15.6 ... which was not successfull as after reboot the Toon seems to be stuck at the orange Toon bootscreen. Now and then Toon seems to reboot by itself as the screen briefly flashes to black. But I do not get into the GUI. I can connect over ssh, but also this seems to indicate a reboot from time to time. I can see "/HCBv2/sbin/qt-gui -platform linuxfb -plugin Tslib" using most of the CPU.
In a PM conversation I adviced him to install 4.16.8. The logs from qt where not that conclusive but my best guess what that the 4.15.8 installation had failed somewhere.
After the update to 4.16.8 his Toon is working fine.
@Toonz, please make a 4.16.8 (and 4.18.8 ) resources file for the Boxx for him so he can tentantize towards Boxx (he's belgian )
Yes it is installed on each Toon also (called resources-static-ebl.rcc or something). Only need to reverse engineer all the code again (very hard labour.. but worth it).