Toon firmware - update script

Forum about the Toon firmware, and its extensions

Moderators: marcelr, TheHogNL, TerrorSource, Toonz

Re: Toon firmware - update script

Postby mAiden » Mon Jun 03, 2019 8:44 am

hansgrave wrote:Last week i run the update script on two Toons: once from the second last firmware and once from firmware 4.16.8.

The update from the second last firmware went smooth but by the update from firmware 4.16.8 the proces hang at some point.

Following the instructions from mAiden did the job to get a working Toon back, thanx.


No problem. Fine that my instructions help you :)
mAiden
Member
Member
 
Posts: 239
Joined: July 2017

Re: Toon firmware - update script

Postby Ojp » Mon Jun 03, 2019 7:38 pm

Hi everyone,

Today I updated the Boxx from 4.13.6 to 4.22.7 using the script. It worked as a charm!

I am not sure to upgrade to version 5 or higher. Are some interesting features to take the risk?

Adios.
Last edited by Ojp on Tue Jun 04, 2019 6:27 am, edited 1 time in total.
Ojp
Starting Member
Starting Member
 
Posts: 1
Joined: June 2019

Re: Toon firmware - update script

Postby TerrorSource » Mon Jun 03, 2019 10:43 pm

Ojp wrote:Hi everyone,

Today I updated the Boxx from 4.13.6 to 4.22.7 using the script. I worked as a charm!

I am not sure to upgrade to version 5 or higher. Are some interesting features to take the risk?

Adios.


Why not upgrade to the latest firmware? Booting the Toon/Boxx is a bit faster with 5.x.x firmware.
TerrorSource
Member
Member
 
Posts: 281
Joined: May 2017

Re: Toon firmware - update script

Postby Toonz » Tue Jun 04, 2019 8:24 am

TerrorSource wrote:
Ojp wrote:Hi everyone,

Today I updated the Boxx from 4.13.6 to 4.22.7 using the script. I worked as a charm!

I am not sure to upgrade to version 5 or higher. Are some interesting features to take the risk?

Adios.


Why not upgrade to the latest firmware? Booting the Toon/Boxx is a bit faster with 5.x.x firmware.


My 2 cents: I read a lot of complaints about delays when taking the Toon out of dim state with firmware 5 on a Toon 1.
I personally prefer 4.x on a Toon 1, feels faster.....booting speed is less relevant for me.

If you have a Toon 2 I would certainly move to version 5 due to better Wifi performance.

Kind regardz,

Toonz
member of the Toon Software Collective
User avatar
Toonz
Forum Moderator
Forum Moderator
 
Posts: 1126
Joined: December 2016

Re: Toon firmware - update script

Postby adval40 » Thu Jun 06, 2019 4:53 pm

yesterday i have updated my firmware with the update script
update failed

i saw into the logfile disk full
which files may i delete ?
adval40
Starting Member
Starting Member
 
Posts: 13
Joined: September 2017

Re: Toon firmware - update script

Postby TheHogNL » Thu Jun 06, 2019 8:52 pm

cleanup /mnt/data/update/*
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1078
Joined: August 2017

Re: Toon firmware - update script

Postby adval40 » Thu Jun 06, 2019 8:57 pm

this dir is empty
adval40
Starting Member
Starting Member
 
Posts: 13
Joined: September 2017

Re: Toon firmware - update script

Postby TheHogNL » Fri Jun 07, 2019 5:40 pm

Then please check /HCBv2/tmp/opkg-cache
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1078
Joined: August 2017

Re: Toon firmware - update script

Postby adval40 » Fri Jun 07, 2019 6:10 pm

I has remove the files in this cache dir i have 30mb free

after reboot he did'nt start up
the display hangs in the boot process

no ssh connection possible
adval40
Starting Member
Starting Member
 
Posts: 13
Joined: September 2017

Re: Toon firmware - update script

Postby adval40 » Fri Jun 07, 2019 6:40 pm

I will try make a new connection via serial
adval40
Starting Member
Starting Member
 
Posts: 13
Joined: September 2017

Re: Toon firmware - update script

Postby TheHogNL » Fri Jun 07, 2019 7:04 pm

Removing the files in /HCBv2/tmp/opkg-cache will never hurt your toon. So the reason why ssh isn't working anymore is not because of this.

What was the previous firmware you where on and to which firmware where you updating to?
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1078
Joined: August 2017

Re: Toon firmware - update script

Postby whizzz63 » Sat Jun 08, 2019 10:40 am

TheHogNL wrote:Removing the files in /HCBv2/tmp/opkg-cache will never hurt your toon. So the reason why ssh isn't working anymore is not because of this.

What was the previous firmware you where on and to which firmware where you updating to?




I had the same problem. Still trying to repair via a serial connection....
whizzz63
Starting Member
Starting Member
 
Posts: 24
Joined: February 2019

Re: Toon firmware - update script

Postby TheHogNL » Sat Jun 08, 2019 1:50 pm

whizzz63 wrote:
TheHogNL wrote:Removing the files in /HCBv2/tmp/opkg-cache will never hurt your toon. So the reason why ssh isn't working anymore is not because of this.

What was the previous firmware you where on and to which firmware where you updating to?




I had the same problem. Still trying to repair via a serial connection....


From which firmware?
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1078
Joined: August 2017

Re: Toon firmware - update script

Postby whizzz63 » Sat Jun 08, 2019 3:00 pm

5.5.7
whizzz63
Starting Member
Starting Member
 
Posts: 24
Joined: February 2019

Re: Toon firmware - update script

Postby TheHogNL » Sat Jun 08, 2019 3:13 pm

That is the to firmware I guess :-) I mean what was the firmware before you started the update
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1078
Joined: August 2017

PreviousNext

Return to Toon Firmware

Who is online

Users browsing this forum: No registered users and 1 guest