Toon App New Onkyo & Pioneer Controller

Forum about forum-provided applications on Toon

Moderators: marcelr, Toonz, TheHogNL, TerrorSource

Toon App New Onkyo & Pioneer Controller

Postby oepi-loepi » Thu Oct 01, 2020 7:23 pm

2 options:

First option is to use a flashed Wemos D1 Mini as websocket controller
Second option is to use Domoticz as http controller


Image

Onkyo or Pioneer (after 2016) receiver needed
To use with Domoticz (without Wemos, please sceoll down)

---------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------

To use with WebSockets (best option)
Wemos D1 mini needed

1. Make sure your receiver has a static network adress
2. Install esptool.exe from https://github.com/igrr/esptool-ck/releases/tag/0.4.13
3. get the latest 2 bin .bin files from https://github.com/oepi-loepi/OnkyoSock ... 266-bridge
4. if you flash an old Wemos D1 mini, first flash the blank 4MB bin file with esptool
5. flash the Onkyo ESCP file with the flash tool

Image

Image

Image

6. After this reset the Wemos D1 Mini and connect your wifi to the AutoConnectAP wifi network.

Image

7. If the configusration page does not open go to 192.168.4.1

Image

8. Enter the wifi credentials, Onkyo adress and select a static IP address for the Wemos D1 mini.

Image

9. Click Save.
10. Update your Toon to the newest firmware, Websockets plugin will be installed automatically.
11. Install the app OnkyoSocket form the Toon store.
12. Add OnkyoSocket to a tile.

Image

13. Click the tile and set the configuration parameters. To use the Socket and the Wemos, slide the top slider to the right. ESP8266 IP is the ip address of the Wemos D1 mini.

Image

14. Select "Show in Sleepmode” to have Toon to show title and artist on the screen when in Sleepmode.

Image

Image

15. Click "Save" on the right hand top corner.
16. Now put some music on the receiver (Spotify over Airplay for instance) and let the magic happen. Sometimes it will take some minutes after a new setup, this is normal..

17. To reset all settings on the Wemos D1 Mini you can go to the webpage of the Wemos D1 Mini in a browser.

Image

---------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------

To use with Domoticz
Domoticz needed

1 .Install the Onkyo receiver on Domoticz using the standard Hardware plugin. After installation go to Devices tab in Domoticz and write down the IDX numbers marked in Yellow:

Image

2. On Toon, update to the latest firmware and install the app from the Toonstore.
3. Create a tile and click the tile to go to the settings menu.
4. Move the top slider to the left to get the domoticz options.

Image

Fill all fields with the Domoticz data and click Save:

When the option "Show in Sleepmode" is selected, the tile will show the trackname and artistname during power on when the Toon is in sleepmode:

Image
Image
oepi-loepi
Member
Member
 
Posts: 88
Joined: February 2019

Return to Toon Apps

Who is online

Users browsing this forum: No registered users and 1 guest