X10 No signal over powerline

Post by **drmacchi** » Sat Dec 13, 2008 1:16 pm

Hi all, i have a problem with every x10 devices that could be plug in wall outlet in a part of the house (the roof). the devices , that work perfectly if plugged in other zones; can not be triggered! the signal over powerline doesn't reach them. Solutions, tips? thanks.
lorenzo

Post by **Bwired** » Sat Dec 13, 2008 3:59 pm

Hi Lorenzo
There is a lot of info on that issue on this forum.
I think you need some filters.
Check the info you find when you search the forum on "fm10"

Post by **drmacchi** » Sat Dec 13, 2008 5:21 pm

Hi Pieter, i did try to invert phase and null like in a post. I did read these posts but it seems that when there's a problem to be solved with filters, it's allround the house. is it true or i can happens only in some zones?

Post by **Bwired** » Sat Dec 13, 2008 5:30 pm

Can happen everywhere in your house. And once you have it working, you should be very careful with placing devices, even a new laptop can cause problems. I have placed some filers on devices like LCD TV and computers

Post by **drmacchi** » Sun Dec 14, 2008 2:51 pm

UPDATE: by changing phase with null wires, problem has been solved! wow ,it's the first time i only take 2 minutes to solve a strange problem....
thanks for info.

Post by **Bwired** » Mon Dec 15, 2008 1:07 am

You are lucky

for now?