Plugwise Homeseer Plugin

Post by **RdP** » Thu Jan 29, 2009 8:02 pm

Yep... That did the trick....

Thanks....

And it looks gooooooooooooooood

Post by **Rene** » Thu Jan 29, 2009 8:08 pm

OK, I have updated the zip file with a new version of web.config.

Rene.

Post by **RdP** » Thu Jan 29, 2009 8:15 pm

Looks good Rene.
Later I have some comments and request.
See below my HStouch image and the new plugin features like the charts.
In HStouch I use the RFXcom virtual usage and I have to find a way to calculate the "overig" usage.

Post by **Rene** » Thu Jan 29, 2009 8:42 pm

What type of TV do you have in your living room consuming more than 500W?

Rene.

Post by **RdP** » Thu Jan 29, 2009 8:51 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by rklootwijk
 What type of TV do you have in your living room consuming more than 500W?

Rene.
<hr height="1" noshade id="quote"></blockquote id="quote">

It's 46 inch plasma screen and actaully this is also the receiver and setop box etc (let's say Home Entertainment set) and it's a lot, you're right/ I will check if the numbers are correct...

Post by **TANE** » Thu Jan 29, 2009 10:50 pm

@Rene,
Thanks for the new futures.
Upgrade for me will be a bit difficult because of all the mappings to make toggle in HST possible. Every Plugwise device(30) is mapped to a virtual HS device.

latest this weekend I will do the installation.

Post by **Rene** » Thu Jan 29, 2009 11:07 pm

This is hopefully the last version that requires you to start all over to implement it. In the next versions I will try to provide an upgrade path without destroying your current configuration.

Rene.

Post by **Verkenner** » Thu Jan 29, 2009 11:33 pm

Hi Rene, THANKS for your great work !

I've installed the new release and I can see all the devices (incl the Special device) in the homepage. Works fine.

I can see the Plugwise Charts page. But there is no chart. Only the text: Total usage and Actual usage. Nothing further.

I am doing research for an hour but I cannot find out what is going wrong. I keep on searching.

Silverlight is running,

WIN XP Prof SP3 and

Post by **Rene** » Thu Jan 29, 2009 11:34 pm

Total usage and Actual usage are links to select the required chart. SO you you have to click on one of them.

Rene.

Post by **Verkenner** » Thu Jan 29, 2009 11:44 pm

Yes, Yes, Yes !!! Thanks Rene, Silly me, did not see they were hyperlink.

Thank Rene, Great job!

Post by **RdP** » Fri Jan 30, 2009 5:28 pm

Wat betekent de icon met het uitroepteken ???

Het staat bij 2 van mijn devices...

Post by **Rene** » Fri Jan 30, 2009 6:05 pm

The exclamation mark means the device status is unknown. The plugwise stick is unable to determine the status of the circle.

Rene.

Post by **RdP** » Fri Jan 30, 2009 7:49 pm

okay, now it's gone, so I think this was a temporarily situation.

Thanks Rene

Post by **Rene** » Fri Jan 30, 2009 8:13 pm

It most of the time is. This is not something of the plugin but a status that is forwarded by Plugwise.

Rene.

Post by **Edwin2008** » Fri Jan 30, 2009 9:45 pm

is it possible to relabel the plugs without really changing the names. i.e. plugwise nows the plug as garden but in the plugin i would like to name it garden (pool side)