RFXCOM I/O

Forum about Rfxcom home automation Domotica devices.

Moderator: b_weijenberg

Post Reply
User avatar
TANE
Forum Moderator
Forum Moderator
Posts: 4806
Joined: Fri Apr 06, 2007 9:46 pm
Location: Netherlands
Contact:

RFXCOM I/O

Post by TANE »

In the next day's I'm going to replace the IPPower I/O device with the new add-on from RFXCOM.

The I/O module is added to the existing ethernet device from RFXcom.
There is also no need for additional plugin...all can be managed from RFxcom plugin for Homeseer.

I have already installed the hardware and software
all is working fine.

More will follow in the next days

Image

Image

<hr noshade size="1"><font size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html<i> My Domotica Hardware Software</i></font id="size1">
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

RFXCOM I/O

Post by Bwired »

Looks good! Same goes for me check my weblog
http://www.bwired.nl/weblog.asp?id=336

<hr noshade size="1"><font size="1">Pieter Knuvers
http://www.bwired.nl <i>Online House in the netherlands. Domotica, Home Automation.</i></font id="size1">
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

RFXCOM I/O

Post by Digit »

Looks nice, what's the price?

<hr noshade size="1"><font size="1">Robert
http://www.hekkers.net <i>Digit's Online Home.</i></font id="size1">
User avatar
b_weijenberg
Forum Moderator
Forum Moderator
Posts: 1744
Joined: Sun May 14, 2006 4:32 pm
Location: Netherlands

RFXCOM I/O

Post by b_weijenberg »

All sold.
Sanka
Member
Member
Posts: 65
Joined: Tue Jan 16, 2007 11:45 am
Location: Netherlands

RFXCOM I/O

Post by Sanka »

Hello Bert,

Will there be more units available or was this a once-off run?
User avatar
b_weijenberg
Forum Moderator
Forum Moderator
Posts: 1744
Joined: Sun May 14, 2006 4:32 pm
Location: Netherlands

RFXCOM I/O

Post by b_weijenberg »

This was one series and will not come into production, at least not soon.
Post-IT
Member
Member
Posts: 448
Joined: Sat Feb 28, 2009 12:01 am
Location: Netherlands (Rotterdam)

Re: RFXCOM I/O

Post by Post-IT »

It took me a while before I got round to hooking up my RFXio to my controller. There just one thing I cannot get out of the manual: Which ground pin should I use to connect on the RFXCOM when using the RFCOM powered setup? Can I use the GND pin on the matchport?
User avatar
b_weijenberg
Forum Moderator
Forum Moderator
Posts: 1744
Joined: Sun May 14, 2006 4:32 pm
Location: Netherlands

Re: RFXCOM I/O

Post by b_weijenberg »

The last pin, after CP10, is the GND (ground) pin
Post Reply

Return to “Rfxcom Receivers & Transmitters Forum”