Hello,
Can someone tell me how to setup the Harmony 1000 to be used with Xanura?
I have a IRIX35 installed in the P-serie and i have already installed Xanura on the Harmony 1000.
Regards,
Dennis
Harmony 1000 programming
Harmony 1000 programming
What is the problem?
If all is installed just send the correct IR signal for triggering.
Example A1 on
<hr noshade size="1"><font size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html<i> My Domotica Hardware Software</i></font id="size1">
If all is installed just send the correct IR signal for triggering.
Example A1 on
<hr noshade size="1"><font size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html<i> My Domotica Hardware Software</i></font id="size1">
Harmony 1000 programming
That is the problem!
Where in the logitech software can i program this?
Regards
Dennis
Where in the logitech software can i program this?
Regards
Dennis
Harmony 1000 programming
Which remote did you selected for x10 control in the Harmony Software.
<hr noshade size="1"><font size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html<i> My Domotica Hardware Software</i></font id="size1">
<hr noshade size="1"><font size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html<i> My Domotica Hardware Software</i></font id="size1">
Harmony 1000 programming
Which remote would you recommend tot program into the Harmony?
Regards,
Dennis
Regards,
Dennis
Harmony 1000 programming
this is going good
<hr noshade size="1"><font size="1">Pieter Knuvers
http://www.bwired.nl <i>Online House in the netherlands. Domotica, Home Automation.</i></font id="size1">
<hr noshade size="1"><font size="1">Pieter Knuvers
http://www.bwired.nl <i>Online House in the netherlands. Domotica, Home Automation.</i></font id="size1">
Harmony 1000 programming
I've had Eaton Xanura selected.
I now have tried several different options but i can't find the option that Light 1 is A1
Regards,
Dennis
I now have tried several different options but i can't find the option that Light 1 is A1
Regards,
Dennis