In the current web portal there is only space for 10 button's (more tab's in the next relase)
With one button you can control a device on/off
Macro
Leeslamp Aan
ALS Portaal knop 3 ingedrukt
EN Lees lamp is uit
1. Schakel Lees lamp Aan
Lees Lamp Uit
ALS Portaal knop 3 ingedrukt
EN Lees lamp is aan
1. Schakel Lees lamp Uit
Web portal tip
Web portal tip
Yes you can use only one button to turn a lamp on or off ... often referred as a toggle switch.
In case you are remotely and can't see the result you will never be sure if the lamp is on or off.
There is another way - in case you press the portal button only once in a period of let say 10 seconds - the lamp will be switched off - in case you pushed the button twice within 10 secs. the lamp will be switched on.
You can use a timer of 10 sec. starting at the first button-push and switching the lamp off ... and in case of a second push of the portal button check if the 10 sec. timer is still running if so switch the lamp on. Just take a couple of seconds between the two pushes in order to let the HCB process the commands ....
In case you are remotely and can't see the result you will never be sure if the lamp is on or off.
There is another way - in case you press the portal button only once in a period of let say 10 seconds - the lamp will be switched off - in case you pushed the button twice within 10 secs. the lamp will be switched on.
You can use a timer of 10 sec. starting at the first button-push and switching the lamp off ... and in case of a second push of the portal button check if the 10 sec. timer is still running if so switch the lamp on. Just take a couple of seconds between the two pushes in order to let the HCB process the commands ....