For those who didn't know this yet and really don't like extra wires:
http://x10-hk.com/store/product_info.php?products_id=32
Features :
- Two Way Communication
- Light status feedback speed in 0.1 second
- 64 Brightness level for Incandescent lamp (Dimmer only)
- Soft start 0-9 seconds setup for Incandescent lamp (Dimmer only)
- Highly Reliable, error rate in 1/10000
- Super High anti-jamming capability
- Code Set Electronically.
- Different Scenes up to 16 for Micro Modules only
- Power : 300W Max
- Load Type : Incandescent
2-way communication, 2-wire module
Moderator: Digit
2-way communication, 2-wire module
Nice!
I'm I correct that they implemented a status update? Is the module now sending a status over the powerline when it is switched On or Off.
I'm I correct that they implemented a status update? Is the module now sending a status over the powerline when it is switched On or Off.
2-way communication, 2-wire module
Well i can't say anything from my own experience, but knowing how PLCBUS works i would say no; it would surprise me if it did. I can tell you more in a couple of weeks... i don't have this module yet.[:(]
- Willem4ever
- Global Moderator
- Posts: 805
- Joined: Mon Oct 30, 2006 3:48 pm
- Location: Uithoorn / Netherlands
2-way communication, 2-wire module
note: you have to place this module near the lamp (ceiling) you are switching, and you need a momentary normally closed switch.