Xanura plug-in modules?

Post by **Digit** » Sun Mar 01, 2009 11:03 pm

Here's what i've made of it:

Post by **Harlin** » Mon Mar 02, 2009 11:11 am

Digit, very nice plugin, where did you get the case?

--
If it walks like a duck, quacks like a duck, ....

Post by **Digit** » Mon Mar 02, 2009 8:09 pm

Conrad 522228.

Post by **Richard** » Mon Mar 02, 2009 9:31 pm

Very nice pushbutton (with led?)

Manual override? or just to trigger the 'program mode'?

Post by **Digit** » Mon Mar 02, 2009 9:55 pm

That button is meant as local switch, with LED indicator (bit expensive though, Conrad 701322). For picture purpose i attached a 9V battery to it - it isn't finished yet

Post by **Lennart** » Tue Mar 03, 2009 1:14 am

@Richard: actually, I guess it is both a manual override (local switch) and a way to enter the program mode: the newest Xanura modules (SAIX12 and the like) switch to program mode after serveral on/off cycles within a certain timeframe. (Digit, please correct me if I'm wrong on this.)

Lennart

Post by **TANE** » Tue Mar 03, 2009 2:17 pm

With the PMIX35 you can program any new device direct when you know the device code.

Post by **Harlin** » Wed Mar 04, 2009 10:56 am

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Chak
 With the PMIX35 you can program any new device direct when you know the device code.
<hr height="1" noshade id="quote"></blockquote id="quote">

With the PMIX35 and new modules you _should_ be able to program devices remotely however this doesn't work flawless. Even the EATON instructor got away with the message 'well most of the time this should work' (@ xanura course)

--
If it walks like a duck, quacks like a duck, ....

Post by **Lennart** » Thu Apr 16, 2009 10:47 am

@Digit: Conrad 522228 is almost twice the price of Conrad 522880. Did you actually pay that? Are there any reasons (other than esthetical) to go for the 522228?

@Henk/sddroog: what's the difference between Conrad 522880 and 522910? One seems to be for pcb mounting (522880) and the other not?

Thanks!

Lennart

Post by **Lempens** » Thu Apr 16, 2009 11:02 am

I think one of them has ventilation. When you look at the sheet http://www2.produktinfo.conrad.com/date ... chluss.pdf

Post by **Digit** » Thu Apr 16, 2009 11:15 am

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by lennart
 Conrad 522228 is almost twice the price of Conrad 522880. Did you actually pay that? Are there any reasons (other than esthetical) to go for the 522228?
<hr height="1" noshade id="quote"></blockquote id="quote">

Yes. Because the cheaper one would probably end up not being used at all because it's so ugly IMO. So i paid a bit more; no other reasons.

Post by **Lennart** » Thu Apr 16, 2009 8:50 pm

Hi Digit,

Thanks! I guess we agree: the other ones are butt-ugly. But then again, if you place 'm begind curtains etc. it won't matter.

Lennart

Post by **Digit** » Fri Apr 17, 2009 12:12 am

You're right, the choice depends on where you're going place them