Tip for Pronto debugging

Forum about hardware/software for the Philips Pronto TSU9600 and other remotes.

Moderator: hvxl

Post Reply
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

Tip for Pronto debugging

Post by Digit »

Read this topic:
http://www.remotecentral.com/cgi-bin/mb ... ad.cgi?951

It describes how you can get all your debugging output displayed on your PC screen. All it takes is some soldering on the PCB in "the base", a cable and a piece of software on your PC.

BTW,
this forum is a must-read for every Pronto owner.
User avatar
Snelvuur
Forum Moderator
Forum Moderator
Posts: 3156
Joined: Fri Apr 06, 2007 11:01 pm
Location: Netherlands
Contact:

Tip for Pronto debugging

Post by Snelvuur »

I'am snelvuur there too ;-)

// Erik (binkey.nl)
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

Tip for Pronto debugging

Post by Digit »

I know; and Chak can be found there to. But who knows what other Pronto-users are reading this forum, so that why i posted it anyway.
User avatar
Snelvuur
Forum Moderator
Forum Moderator
Posts: 3156
Joined: Fri Apr 06, 2007 11:01 pm
Location: Netherlands
Contact:

Tip for Pronto debugging

Post by Snelvuur »

If i know there dutch, i send them a message to come check out this place too :) other can too ofcourse.. but sometimes its handy.

// Erik (binkey.nl)
Post Reply

Return to “Philips Pronto (TSU9600), IRtrans and other remotes”