tuning lan connections

Forum over de RFXCOM plugin (DUTCH forum)

Moderator: b_weijenberg

Post Reply
labium
Advanced Member
Advanced Member
Posts: 512
Joined: Sat Feb 06, 2010 10:56 am
Location: netherlands

tuning lan connections

Post by labium »

i get an awfol lot of reconnection errors or to many charater errors.

are there rules to tune the polling time or other variables of the connection ?


31-1-2011 13:30:42 Error RFXCOM(ComTimer_Elapsed) IO #1 response took too long 192.168.10.201 , retry
31-1-2011 13:30:42 Info RFXCOM(reconnect) receiver #1 try to reconnect.
31-1-2011 13:30:43 Info RFXCOM(reconnect) receiver #2 try to reconnect.
31-1-2011 13:30:43 Error RFXCOM(ComTimer_Elapsed) IO #0 response took too long 62.238.jjj, retry
31-1-2011 13:30:47 Error RFXCOM(ComTimer_Elapsed) IO #1 response took too long 192.168.10.201 , retry
31-1-2011 13:30:48 Error RFXCOM(ComTimer_Elapsed) IO #0 response took too long 62.238jjj, retry

31-1-2011 13:30:48 Warning RFXCOM(ComTimer_Elapsed) IO #1 too many characters received 192.168.10.201 , retry
31-1-2011 13:30:48 Warning RFXCOM(ComTimer_Elapsed) IO #1 too many characters received 192.168.10.201 , retry

31-1-2011 13:30:49 Error RFXCOM(ComTimer_Elapsed) IO #0 response took too long 62.238.jjj, retry
31-1-2011 13:30:50 Error RFXCOM(ComTimer_Elapsed) IO #1 response took too long 192.168.10.201 , retry
31-1-2011 13:30:51 Error RFXCOM(ComTimer_Elapsed) IO #0 response took too long 62.238.jj, retry
31-1-2011 13:30:51 Error RFXCOM(ComTimer_Elapsed) IO #1 response took too long 192.168.10.201 , retry
31-1-2011 13:30:52 Error RFXCOM(ComTimer_Elapsed) IO #0 response took too long 62.238.jjj, retry
31-1-2011 13:30:52 Error RFXCOM(ComTimer_Elapsed) IO #1 response took too long 192.168.10.201 , retry
31-1-2011 13:30:53 Error RFXCOM(ComTimer_Elapsed) IO #0 response took too long 62.238.jjj, retry
User avatar
b_weijenberg
Forum Moderator
Forum Moderator
Posts: 1744
Joined: Sun May 14, 2006 4:32 pm
Location: Netherlands

Re: tuning lan connections

Post by b_weijenberg »

Do you have a RFXio installed???

If not remove the IO devices from the RFXCOM Interfaces configuration.
labium
Advanced Member
Advanced Member
Posts: 512
Joined: Sat Feb 06, 2010 10:56 am
Location: netherlands

Re: tuning lan connections

Post by labium »

no and the removal of the io devices works fine, no error messages anymore.
i now understand the need of i/o port configuration on the interface rfxlan in the rfxreceiver.

i cant find any rfxio information on the rfxcom website, with google some information.

not much fabricated or used.

thank you.
Post Reply

Return to “Homeseer Rfxcom Plugin Forum”