HomeSeer event "manual with condition" not working?

Homeseer Forum in het Nederlands (DUTCH forum)

Moderator: Ruud

Post Reply
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

HomeSeer event "manual with condition" not working?

Post by raymonvdm »

Hi,

I`m trying to create an HomeSeer event "manual with condition" but it does not seem to be working.


- Created event to switch on a device (A1) when the event is manual trigged
- Added a dependency to the event (another device A2) needs to be on)
- When i run the event the device A1 is always turned on

Is there anyone who can try this to see what is going wrong ?

Note:

When i change the dependency to time after 11:00 en before 11:59 the device A1 is stil switched on so dependency`s for a manual triggered event are not working

Note2:
I have found a look a like topic but it is from 2009
http://www.domoticaforum.eu/viewtopic.php?t=3233
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
AshaiRey
Senior Member
Senior Member
Posts: 1310
Joined: Mon Feb 02, 2009 5:27 pm
Location: Netherlands
Contact:

Re: HomeSeer event "manual with condition" not working?

Post by AshaiRey »

One remark here
Don't use A1 because that one is often used as default for devices such as the motion detectors MS13 when they come online/new batteries or as default. Also A1 is often used as device code for Lights ALL ON/OFF
Bram
User avatar
Phaeton
Advanced Member
Advanced Member
Posts: 573
Joined: Wed May 19, 2010 12:44 pm
Location: Wassenaar
Contact:

Post by Phaeton »

Hi, you can only use 'manipual with condition' when you trigger it from another event. Then it will work with the condition. Why? I don't know, but this is the way ;-)

Be sure to use the correct setting in the event you use to trigger the 'manual with conditions event'. It's a tag in the script with match conditions or something. Let us know if you can get it to work or need some more help.
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: HomeSeer event "manual with condition" not working?

Post by raymonvdm »

I created a additional event which triggers the actual event, so it is working now
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Post Reply

Return to “Homeseer algemeen Forum”