Not licensed for extended scripting

Plugwise Forum about Plugwise devices and the Source software.
viper1705
Starting Member
Starting Member
Posts: 4
Joined: Thu Oct 25, 2012 10:03 am

Re: Not licensed for extended scripting

Post by viper1705 »

Hi Darwush,

Could you please provide me with the details as well ?

thx in advance.
User avatar
nico_gh2
Member
Member
Posts: 133
Joined: Wed Apr 06, 2011 12:24 pm
Location: Betuwe, Netherlands
Contact:

Re: Not licensed for extended scripting

Post by nico_gh2 »

geurtje wrote:Any one knows the hex code for the new version of source plugwise.images.dll version 2.23? I am stuck as well after an unattended upgrade :oops: ... any help is appreciated!
I'm in the same situation as Geurtje, help appreciated.
Darwusch
Member
Member
Posts: 164
Joined: Sun Dec 21, 2008 10:25 pm
Location: Netherlands

Re: Not licensed for extended scripting

Post by Darwusch »

pm sent
Erikwout
Starting Member
Starting Member
Posts: 5
Joined: Fri Nov 09, 2012 10:44 pm

Re: Not licensed for extended scripting

Post by Erikwout »

Hello Darwush
I can't send PM :-(

tried the option you provided, but there I can't find the value you suggested,
i have the DLL version 2.23.0.0
can you please give me any sugestions ?
Thanks in advance
Erik
FerryHeibrink
Starting Member
Starting Member
Posts: 3
Joined: Mon Apr 08, 2013 2:30 pm

Re: Not licensed for extended scripting

Post by FerryHeibrink »

Hello Darwush,

I have sent you a message before (in Dutch, so it was not approved, my bad).

I recently contacted Plugwise for the extended scripting functionality. I would happily pay a reasonable amount for the scripting functionality, but not the astronomous amount of 1000 euro's, just for private use. I like Plugwise a lot, but 1000 euro's is a bit too much :wink: .

At this moment I am awaiting a response from the helpdesk. I would like to solve this problem legally, but when my request is denied I would like to try the 'hack'. Not for production use, just for testing to see if it really is worth the amount of money they would possible ask me.

Could you please contact me for further instructions? (I know how to HEX edit).

I am new here (just only reading before). I don't know how to PM you via the site. If you need more contact info please post a reply.

Thank you very much!
Shadow47
Starting Member
Starting Member
Posts: 1
Joined: Wed Apr 17, 2013 9:50 pm

Re: Not licensed for extended scripting

Post by Shadow47 »

Hi Darwush,

can you send me the details to the 2.23 version as well?

thanks a lot !

regards
jvmkite
Starting Member
Starting Member
Posts: 5
Joined: Wed Jun 22, 2011 5:06 pm

Re: Not licensed for extended scripting

Post by jvmkite »

Hello Darwush,

Can you send me the details for the 2.23?

Thank you,
Best regards
mcking
Starting Member
Starting Member
Posts: 1
Joined: Sun Mar 21, 2010 6:43 pm

Re: Not licensed for extended scripting

Post by mcking »

Woulkd also like to receive the details for 2.23.
Thanks!
Dowser
Member
Member
Posts: 73
Joined: Mon Aug 06, 2007 1:58 pm
Location: Sweden
Contact:

Re: Not licensed for extended scripting

Post by Dowser »

And me2 :)
//Markus
User avatar
Harry
Member
Member
Posts: 329
Joined: Mon Apr 10, 2006 1:43 am
Location: Drachten

Re: Not licensed for extended scripting

Post by Harry »

Hi Darwush,

Could you please provide me with the details as well ?

thx in advance.
123unlock
Member
Member
Posts: 86
Joined: Sun Jun 03, 2012 3:08 pm
Location: Apeldoorn / Netherlands
Contact:

Re: Not licensed for extended scripting

Post by 123unlock »

here same issue, my images.dll file is now at version 2.23.5.1 but cannot find the part that need to be changed
hope someone can help me out on this
Xtrusion Digital Home Automation Project
tommes2
Starting Member
Starting Member
Posts: 4
Joined: Wed Dec 21, 2011 11:05 pm

Re: Not licensed for extended scripting

Post by tommes2 »

ReHi @Darwusch,

could you send me the patch too, please ?

Thanks in advance
Tom ... again ;-)

PS: do you know the current firmware release for the circles ?
The current source release is a little bit .... Hmmmm ... strange - I think ... ?

Thanks a lot in advance !
User avatar
Phaeton
Advanced Member
Advanced Member
Posts: 573
Joined: Wed May 19, 2010 12:44 pm
Location: Wassenaar
Contact:

Re: Not licensed for extended scripting

Post by Phaeton »

Hi darwusch, me to please. Tnx
groeten,
Harry
viper1705
Starting Member
Starting Member
Posts: 4
Joined: Thu Oct 25, 2012 10:03 am

Re: Not licensed for extended scripting

Post by viper1705 »

123unlock wrote:here same issue, my images.dll file is now at version 2.23.5.1 but cannot find the part that need to be changed
hope someone can help me out on this
Hi Darwush,

Same problem. Is the address for dll 2.23.5.1 already known ? Or not ?

grtz.
viper1705
Starting Member
Starting Member
Posts: 4
Joined: Thu Oct 25, 2012 10:03 am

Re: Not licensed for extended scripting

Post by viper1705 »

viper1705 wrote:
123unlock wrote:here same issue, my images.dll file is now at version 2.23.5.1 but cannot find the part that need to be changed
hope someone can help me out on this
Hi Darwush,

Same problem. Is the address for dll 2.23.5.1 already known ? Or not ?

grtz.
Hi Darwush,

I have version 20130601.2, tried to change it the way you explained, which seems to work, because when I start source, it starts up as source pro, but still the extended scripting is disabled in the webserver. (still says "Totals are 0, because extended scripting is disabled")

grtz
Post Reply

Return to “Plugwise Forum”