Due to a bad HDD I needed to reinstall the server.
Doing so I also installed the new Source 2.23(2130901.2).
Now for some reason all Plugs are showing 0 watt as usage. (ON/OFF is working fine)
Could it be that the firmware in my plugs is to old? (t's version 2008-08-26)
if so, where do I download the latest firmware, and how do I update the plugs with it?
Thank you
new installation. Data alsways showing 0 watt
new installation. Data alsways showing 0 watt
--
Maak nu je eigen video bericht online.
Anyone interested in time travel meet me here last Thursday!!
ıɟ ʇ,uɐɔ noʎ buıɥʇʎuɐ ʇɹɐʇs ɹǝʌǝu
Maak nu je eigen video bericht online.
Anyone interested in time travel meet me here last Thursday!!
ıɟ ʇ,uɐɔ noʎ buıɥʇʎuɐ ʇɹɐʇs ɹǝʌǝu
Re: new installation. Data alsways showing 0 watt
Start the upgrade wizzard of the Plugwise software.
/Rien
/Rien
Rien
Re: new installation. Data alsways showing 0 watt
Great..
Only options available after the message: Afbreken, Opnieuw and Negeren
When I press "Negeren" the update wizard exits.
The Stick has firmware 2008-03-10. The plugs are using: 2008-08-26Het voorberieden is mislukt bij 1 of meerdere modules.
Voor het optimaal functionere van uw plugwise netwerk dienen modules van het zelfde type dezelfde firmware te hebben.
Only options available after the message: Afbreken, Opnieuw and Negeren
When I press "Negeren" the update wizard exits.
--
Maak nu je eigen video bericht online.
Anyone interested in time travel meet me here last Thursday!!
ıɟ ʇ,uɐɔ noʎ buıɥʇʎuɐ ʇɹɐʇs ɹǝʌǝu
Maak nu je eigen video bericht online.
Anyone interested in time travel meet me here last Thursday!!
ıɟ ʇ,uɐɔ noʎ buıɥʇʎuɐ ʇɹɐʇs ɹǝʌǝu
Re: new installation. Data alsways showing 0 watt
there is a change you need an older version of the source
Re: new installation. Data alsways showing 0 watt
Sounds logical.
Anyone here with an "old" version of Source for me that "might" work?
Anyone here with an "old" version of Source for me that "might" work?
--
Maak nu je eigen video bericht online.
Anyone interested in time travel meet me here last Thursday!!
ıɟ ʇ,uɐɔ noʎ buıɥʇʎuɐ ʇɹɐʇs ɹǝʌǝu
Maak nu je eigen video bericht online.
Anyone interested in time travel meet me here last Thursday!!
ıɟ ʇ,uɐɔ noʎ buıɥʇʎuɐ ʇɹɐʇs ɹǝʌǝu
Re: new installation. Data alsways showing 0 watt
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: new installation. Data alsways showing 0 watt
Its easy when u know how to
From HD email
From HD email
Download and install Source 2.17 from http://myplugwise.com/source/pwsetup_2.17.exe
Install the set and click update from Source (this way the Source doesnt update first)
Then the update wizard starts and will update the modules.
Then u can go to the release version of Source and all should work.
Re: new installation. Data alsways showing 0 watt
Thank you all,
Plugs are updated and the latest source is working fine for me
Plugs are updated and the latest source is working fine for me
--
Maak nu je eigen video bericht online.
Anyone interested in time travel meet me here last Thursday!!
ıɟ ʇ,uɐɔ noʎ buıɥʇʎuɐ ʇɹɐʇs ɹǝʌǝu
Maak nu je eigen video bericht online.
Anyone interested in time travel meet me here last Thursday!!
ıɟ ʇ,uɐɔ noʎ buıɥʇʎuɐ ʇɹɐʇs ɹǝʌǝu