Reset AN157-2 and AD142

[ramnol]

Two days ago i installed a Vera Lite with a AN157-2 (on-off switch) and a AD142 (dimmer).
Including the two modules was quite easy.
I tested the system in many ways and in that proces a invalid plugin was created.
I gave the Vera Lite an factory reset and now my list of devices became empty.

I tried to include the AN157 and AD142 again.
That did not work. The modules wil not go into include mode anymore.
Is there any way that I can reset the modules?

Thanks in advance.

Guus.

[Aurelia]

Did you try to exclude the modules first?

Normally you can include them again after exclusion.

Leo

[ramnol]

I tried to exclude, but appearently it did not work.
Is there another solution?

Guus.

[Aurelia]

Sorry I don't have a AN157 to try only AN158-2.
For An158-2 exclusion works when you set the controller in exclusion mode and press the button on the module 3 times within 1.5 sec.

Leo

[ramnol]

The devices (modules) are not in de controler (Vera Lite) anymore.
They disappeared after a the factory reset of the Vera Lite.
So there is no way (as far as I know) that I can exclude the modules with the Vera controler.

Guus.

[Akatar]

you have to exclude the units it doesn't matter if they are not included on the vera.

just exclude them and then you can include them again

[ramnol]

Problem solved.
Was a lack of knowlegde.
I used the exclude option with the ad Advanced Z-Wave devices under Ad Devices.
Thanks Akatar. Your answer made me look into de vera software again.

Guus.