Domiticz with openmilight / raspberry / nRF24 (milight)

Forum about LEDS, LED lights, DMX and other lights.

Moderator: Mversluis

Post Reply
wkloppen
Starting Member
Starting Member
Posts: 6
Joined: Thu Jan 12, 2017 10:28 pm
Location: Amsterdam

Domiticz with openmilight / raspberry / nRF24 (milight)

Post by wkloppen »

L & G's

I was wandering if anybody has experience with connection milights directly (without RFlink gateway, arduino mega) to the raspberry using the software of this german guy. I installed the stuff without any problems and now I need to now how to create the devices triggering scripts or something sending the commands to the milight bulbs via the nRF24 with Domoticz.

torsten-traenkner.de/wissen/smarthome/o ... ilight.php

thx in advance

willem
Platform: Raspberry PI 3 with Domoticz, Connected devices: Open Therm Gateway with ESP-12 wifi-bridge
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: Domiticz with openmilight / raspberry / nRF24 (milight)

Post by Bwired »

No, but why go to so much troubles, the ,Milight has a Lan/wifi controller which is supported by Domoticz
wkloppen
Starting Member
Starting Member
Posts: 6
Joined: Thu Jan 12, 2017 10:28 pm
Location: Amsterdam

Re: Domiticz with openmilight / raspberry / nRF24 (milight)

Post by wkloppen »

I know that but I've read the wifi bridge is somewhat unstable and it only allow s for 4 groups / bulbs and it saves me another device connected to the wifi network.
Platform: Raspberry PI 3 with Domoticz, Connected devices: Open Therm Gateway with ESP-12 wifi-bridge
Post Reply

Return to “LEDS, DMX & Lights Forum”