Hi,
I use the opentherm GW and a remeha calenta. I studied this site: http://otgw.tclcode.com but I cannot find information how to wire the Opentherm GW. Does anybod know?
Wiring Remeha Calenta
Moderator: hvxl
-
- Starting Member
- Posts: 41
- Joined: Tue Aug 13, 2013 10:45 am
Re: Wiring Remeha Calenta
If you look at the Schematic, you will see, on the left side:
1. A pair of terminals (X1-1 and X1-2) labelled "thermostat"
2. A pair of terminals (X2-1 and X2-2) labelled "boiler"
Boiler terminals X12-1 and X12-2 are labelled OT (OpenTherm)
Connect X2-1 and X2-2 of the Gateway to X12-1 and X12-2 of the boiler (any way round)
Connect your Opentherm thermostat to X1-1 and X1-2 of the Gateway (any way round)
1. A pair of terminals (X1-1 and X1-2) labelled "thermostat"
2. A pair of terminals (X2-1 and X2-2) labelled "boiler"
Boiler terminals X12-1 and X12-2 are labelled OT (OpenTherm)
Connect X2-1 and X2-2 of the Gateway to X12-1 and X12-2 of the boiler (any way round)
Connect your Opentherm thermostat to X1-1 and X1-2 of the Gateway (any way round)