Toon as a domotica controller?

[DennisD]

Well, I will try to connect my non rooted today and include my meteradapter to it. If that solves the issue I will root it. Is the latest software 4.4 still rootable? Because I know there was a software update on that one but didn't bother with updating. That one is still subscribed with eneco

Updated my rooted one tot 4.4.21 and downgraded the happ_thermostat and everything is working great now (just missing the double e meter function high/low rate).

[makkie2002]

I also upgraded successfully to 4.4.21 ... still root

I however have a question on what you guys have as apps in your "menu".
I seem to be missing "rookmelder" and "bedien opties".
I think they were also not available when I was still at 3.x (not sure).
Have a look at my screenshot:

[ronalddehaan]

Hi Guys,

My name is Ronald and I am new here. I will be trying to root my Toon soon so it seemed like a good idea to register an account here in case I have questions.
Turns out; i already have a question.
I've purchased the USB 2.0 To TTL 6PIN Module from hobbyelectronica.nl/product/ch340g-seri ... converter/ as suggested somewhere in the beginning of this topic.
When plugged in it's recognised by Windows just fine. Problem is; how do I attach the wires to it Seems basic, I know
Hope you guys can point me in the right direction

[Toonz]

All described at the rooting manual in the Manuals/Tutorials topic :domoticaforum.eu/viewtopic.php?f=87& ... mp;t=11235

[TerrorSource]

I also upgraded successfully to 4.4.21 ... still root

I however have a question on what you guys have as apps in your "menu".
I seem to be missing "rookmelder" and "bedien opties".
I think they were also not available when I was still at 3.x (not sure).
Have a look at my screenshot:

Thats because you didn't activate your Toon.
There's a small how-to somewhere on the forum

[phoenixb]

Hi,

Small question, i have install the VNC package only on reboot i have the next overview:

Code: Select all

eneco-001-015883:~#
The SSL VNC desktop is:  eneco-001-015883:9
PORT=5909
SSLPORT=5909

The SSL VNC desktop is:  eneco-001-015883:10
PORT=5910
SSLPORT=5910

The SSL VNC desktop is:  eneco-001-015883:11
PORT=5911
SSLPORT=5911

The SSL VNC desktop is:  eneco-001-015883:12
PORT=5912
SSLPORT=5912

The SSL VNC desktop is:  eneco-001-015883:13
PORT=5913
SSLPORT=5913

The SSL VNC desktop is:  eneco-001-015883:14
PORT=5914
SSLPORT=5914

The SSL VNC desktop is:  eneco-001-015883:15
PORT=5915
SSLPORT=5915

The SSL VNC desktop is:  eneco-001-015883:16
PORT=5916
SSLPORT=5916

The SSL VNC desktop is:  eneco-001-015883:17
PORT=5917
SSLPORT=5917

The SSL VNC desktop is:  eneco-001-015883:18
PORT=5918
SSLPORT=5918
could not fork
fork: Cannot allocate memory

And after the last one it's freeze, have I done something wrong?

[marcelr]

Hmmm ... race condition in inittab, please remove x11vnc from inittab and start it manually. You are not the only one, apparently. Need to look into that.

[phoenixb]

Is it possible because i have at this moment an low SW version? (2.xx)

[marcelr]

Could be. I don't really know what's causing this (yet).

[phoenixb]

Small update : firmware update with the original fw. And looks now that vnc is working.

[ronalddehaan]

All described at the rooting manual in the Manuals/Tutorials topic :domoticaforum.eu/viewtopic.php?f=87& ... mp;t=11235

Besides that i am more of a "view picture" kinda guy I have to connect the headers to both ends, to the USB stick and to the board.
The board part is described so i should be able to figure it out but that still leaves me with the usb stick header.
I'll try to upload a picture to make the thing clear

[marcelr]

No doubt there will be markings GND, TxD, RxD, Vcc, 5V and 3.3V on the other (in this picture invisible) side of the PCB.

[makkie2002]

Hi,

Can someone point me to a (free) VNC viewer for iOS that works with the VNC server of Toon.
The ones I tried do not work, probably due to the special SSL encoding scheme in the VNC server of Toon.
Maybe it is possible to start the x11vnc with options to use other type of encryption that the "normal" VNC viewers understand?
For me encryption is not required because I always connect to my home network via VPN.

[TerrorSource]

Hi,

Can someone point me to a (free) VNC viewer for iOS that works with the VNC server of Toon.
The ones I tried do not work, probably due to the special SSL encoding scheme in the VNC server of Toon.
Maybe it is possible to start the x11vnc with options to use other type of encryption that the "normal" VNC viewers understand?
For me encryption is not required because I always connect to my home network via VPN.

im using ssvnc, a custom vnc application.
http://www.karlrunge.com/x11vnc/ssvnc.html

[makkie2002]

im using ssvnc, a custom vnc application.

Thanks, but I am specifically looking for a VNC viewer for apple ipad/iphone (iOS).
Best would be to have the option to turn off the encryption in the x11vnc server of Toon.