Toon app: boiler status
Moderators: marcelr, TheHogNL, Toonz
Re: Toon app: boiler status
I did a factory reset and indeed my iptables and root access did not change
I had to redo some settings in /qmf/config/config_happ_scsync.xml with EndDate and such and now my Toon is working again.
However, the message 'Geen ketelmodule. Verbind Toon met een ketelmodule' is still there, and the http output of page http://TOONIP/happ_thermstat?action=printTableInfo is still active. This means that happ-thermstat_1.554-trunk_qb2.ipk is still active.
I would like to do is opkg install <newest happ-themstat file>, but I don't have this file. Is there anyone that can provide this file for me, since I downgraded the existing package?
I had to redo some settings in /qmf/config/config_happ_scsync.xml with EndDate and such and now my Toon is working again.
However, the message 'Geen ketelmodule. Verbind Toon met een ketelmodule' is still there, and the http output of page http://TOONIP/happ_thermstat?action=printTableInfo is still active. This means that happ-thermstat_1.554-trunk_qb2.ipk is still active.
I would like to do is opkg install <newest happ-themstat file>, but I don't have this file. Is there anyone that can provide this file for me, since I downgraded the existing package?
Re: Toon app: boiler status
I would like to get the codes for my smart plugs. How did you get this list?Toonz wrote:To add to this post for convenience a complete overview of all variables available in the rrd databases from version 4.10.Toonz wrote:I believe these are the parameters you can use in the http call which I have successfully tested:
readableTime (values 0 or 1 - converts Epoch to normal time
skipEmpty (values 0 or 1 - skips null value readings)
nullForNaN (values 0 or 1 - shows null instead of NaN)
loggerName (string without quotes)
rra (string without quotes)
from (epoch time)
to (epoch time)
samples (integer value - determines how many values you will receive back)
Example:More parameters exist but these are for the function setRrdData with which you can create rra data yourselfCode: Select all
http://192.168.x.x/hcb_rrd?action=getRrdData&loggerName=thermstat_boilerChPressure&rra=year&readableTime=1&samples=100&nullForNaN=1&from=1504301154&to=1509301154&skipEmpty=1
Note that the ID's after the smart plug variables are different for each smart plug. Each plug will have it's own set of databases.
Re: Toon app: boiler status
Read this post: viewtopic.php?f=87&t=11671&start=15#p84082jeltel wrote:I would like to get the codes for my smart plugs. How did you get this list?
member of the Toon Software Collective
Re: Toon app: boiler status
Than the plugs aren't logged
Strange because it seems to work on a non rooted toon.
Strange because it seems to work on a non rooted toon.
Re: Toon app: boiler status
Mine are logged allright.
Re: Toon app: boiler status
I have two Toons, one logged electricity usage of the plugs the other doesn't.jeltel wrote:Than the plugs aren't logged
Strange because it seems to work on a non rooted toon.
Will find out the configuration differences when I have time and post my findings here.
member of the Toon Software Collective
Re: Toon app: boiler status
No configurations needed?marcelr wrote:Mine are logged allright.
And do they also show up in the interface of Toon? Or only in the database?
edit: no need for reconfiguration, just re add them.
viewtopic.php?f=87&t=11939
Last edited by jeltel on Wed Jan 10, 2018 2:57 pm, edited 1 time in total.
Re: Toon app: boiler status
Quoting myself lol I fixed it after all by enabling the connection to the Eneco Service Center. Then the new packages started downloading and appeared magically in /mnt/data/update . I could then install the proper thermstat package. To prevent loosing ssh access I added a restore iptables.conf to crontab as described on this forum. After rebooting and fixing EndDate everything is working againrubyan wrote:I would like to do is opkg install <newest happ-themstat file>, but I don't have this file. Is there anyone that can provide this file for me, since I downgraded the existing package?
-
- Member
- Posts: 76
- Joined: Sun Jan 14, 2018 5:12 pm
Re: Toon app: boiler status
rubyan wrote:Quoting myself lol I fixed it after all by enabling the connection to the Eneco Service Center. Then the new packages started downloading and appeared magically in /mnt/data/update . I could then install the proper thermstat package. To prevent loosing ssh access I added a restore iptables.conf to crontab as described on this forum. After rebooting and fixing EndDate everything is working againrubyan wrote:I would like to do is opkg install <newest happ-themstat file>, but I don't have this file. Is there anyone that can provide this file for me, since I downgraded the existing package?
i've had exactly the same issue.
Downgraded to happ-thermstat_1.554-trunk_qb2 ;
After that; i got the error-message 'Geen ketelmodule. Verbind Toon met een ketelmodule'
So then it's NOT impossible to set the Temperature on Toon.
It was however possible to change Temperature in Domoticz; that still worked on the background.
And the http://TOONIP/happ_thermstat?action=printTableInfo Worked.
But still the Error message; i Fixed it by reinstalling the OPGK Update...and i did everything all over again.
But i still would like a Working http://TOONIP/happ_thermstat?action=printTableInfo Without Downgrading.
Is there already a solution?
Last edited by Hypermobile on Sun Jan 14, 2018 6:47 pm, edited 1 time in total.
Re: Toon app: boiler status
I also have some strange things after upgrade to 4.10.6 for me is reading out the power what I used in domoticz but after the upgrade to an higher version it does not work anymore.
When I check the power read out link it is complete diffrent in 4.10.6
http://IP_TOON/happ_pwrusage?action=GetCurrentUsage
and it looks like this:
before it was a big list with {2.3} {3.3} etc on the front that was IDX you choose in domoticz to use as read out.
When I check the power read out link it is complete diffrent in 4.10.6
http://IP_TOON/happ_pwrusage?action=GetCurrentUsage
and it looks like this:
Code: Select all
{
result: "ok",
powerUsage: {
value: null,
dayCost: null,
avgValue: null
},
powerProduction: {
value: 0,
dayCost: 0,
avgValue: 93.67
},
gasUsage: {
value: null,
dayCost: null,
avgValue: null
}
}
Re: Toon app: boiler status
Are you sure you're not mistaken with the URL's? Because I have both (on older FW)
You seem to be referring to this one:
http://toon/hdrv_zwave?action=getDevices.json
Home Assistant uses this URL to monitor consumption; my guess is Domoticz should too.
Do you use a meter adapter and did you update its firmware? Maybe the device id has changed:
https://github.com/cyberjunky/home-assi ... s/issues/3
You seem to be referring to this one:
http://toon/hdrv_zwave?action=getDevices.json
Home Assistant uses this URL to monitor consumption; my guess is Domoticz should too.
Do you use a meter adapter and did you update its firmware? Maybe the device id has changed:
https://github.com/cyberjunky/home-assi ... s/issues/3
Re: Toon app: boiler status
Hi all,
I just released on ToonStore the beta version of the new boiler status app.
It is a remake of the old app Marcelr created in the past but which stopped working from version 3.6.
The data on the tile can be retrieved in JSON format from toon via [url]http://<toon-ip/boilerstatus/boilervalues.txt[/url] for use in external applications like domoticz and others.
Data is refreshed every minute (tile doesn't need to be active on the homescreen for the data to be refreshed)
Screenshot tile:
I just released on ToonStore the beta version of the new boiler status app.
It is a remake of the old app Marcelr created in the past but which stopped working from version 3.6.
The data on the tile can be retrieved in JSON format from toon via [url]http://<toon-ip/boilerstatus/boilervalues.txt[/url] for use in external applications like domoticz and others.
Data is refreshed every minute (tile doesn't need to be active on the homescreen for the data to be refreshed)
Screenshot tile:
Last edited by Toonz on Sun Jan 21, 2018 2:15 pm, edited 1 time in total.
member of the Toon Software Collective
-
- Member
- Posts: 76
- Joined: Sun Jan 14, 2018 5:12 pm
Re: Toon app: boiler status
Just installed it.Toonz wrote:Hi all,
I just released on ToonStore the beta version of the new boiler status app.
It is a remake of the old app Marcelr created in the past but which stopped working from version 3.6.
The data on the tile can be retrieved in JSON format from toon via [url]http://<toon-ip/boilerstatus/boilervalues.txt[/url] for use in external applications like domoticz and others.
Data is refreshed every minute (tile doesn't need to be active on the homescreen for the data to be refreshed)
Screenshot tile (from my dev toon without boiler attached):
Got 0.0 Bar of Pressure.
When i downgraded to happ-thermstat_1.554-trunk_qb2 (don't do that on 4.9.23 and other newer versions, you break the boilertile.)
I also noticed that there was no Pressure there at the time.
- Attachments
-
- image-2018-01-21.jpg (191.37 KiB) Viewed 13844 times
Last edited by Hypermobile on Sun Jan 21, 2018 2:10 pm, edited 1 time in total.
Re: Toon app: boiler status
Just to clarify: after you downgraded the happ_thermstat you don't see the boiler pressure anymore? Are your rra databases not populated by that version of happ_thermstat?Hypermobile wrote:Got 0.0 Bar of Pressure.
When i downgraded to happ-thermstat_1.554-trunk_qb2 (don't do that on 4.9.23 and other newer versions, you break the boilertile.)
I also noticed that there was nog Pressure there at the time.
member of the Toon Software Collective
-
- Member
- Posts: 76
- Joined: Sun Jan 14, 2018 5:12 pm
Re: Toon app: boiler status
Toonz wrote:Just to clarify: after you downgraded the happ_thermstat you don't see the boiler pressure anymore? Are your rra databases not populated by that version of happ_thermstat?Hypermobile wrote:Got 0.0 Bar of Pressure.
When i downgraded to happ-thermstat_1.554-trunk_qb2 (don't do that on 4.9.23 and other newer versions, you break the boilertile.)
I also noticed that there was nog Pressure there at the time.
A while ago i Downgraded thermstat because i red that on the forum,
and saw accurate value in the [url]http://IP_TOON/happ_thermstat?action=printTableInfo[/url]
But the only blank one was Pressure over there.
And the i got a Error message "Ketelmodule not connected"
I didn't know how to upgrade back to the latest thermstat again;
But by doing "OPKG Upgrade" in Putty. All updates to 4.9.23 were done Again.
Installed Toonstore and stuff again. Error message was gone
And the [url]http://IP_TOON/happ_thermstat?action=printTableInfo[/url] was Zero's again
Then waited till this app was done