NEXT K9 PG2 and rfxcom

Forum about Visonic products like Powermax Plus and Powermax Pro

Moderators: Rene, Willem4ever

Post Reply
labium
Advanced Member
Advanced Member
Posts: 512
Joined: Sat Feb 06, 2010 10:56 am
Location: netherlands

NEXT K9 PG2 and rfxcom

Post by labium »

i cant get any signal with an rfxcom lan 868 receiver from these devices , should htey be anrolled first ?
Menno
Member
Member
Posts: 179
Joined: Thu May 22, 2008 10:46 pm
Location: Netherlands

Re: NEXT K9 PG2 and rfxcom

Post by Menno »

PG2 is not supported by RFXcom 868 receiver
labium
Advanced Member
Advanced Member
Posts: 512
Joined: Sat Feb 06, 2010 10:56 am
Location: netherlands

Re: NEXT K9 PG2 and rfxcom

Post by labium »

is there another reciever that does ?
uAlex73
Member
Member
Posts: 218
Joined: Sun Jan 01, 2012 3:42 pm
Contact:

Re: NEXT K9 PG2 and rfxcom

Post by uAlex73 »

No, because it is encrypted communication between the powermaster and the pir
DomotiGa / Z-Wave / RFXCom / Visonic PowerMaster / Home Assistant / Zigbee2MQTT / DSMR Reader / Toon1 (rooted)
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: NEXT K9 PG2 and rfxcom

Post by Bwired »

labium
Advanced Member
Advanced Member
Posts: 512
Joined: Sat Feb 06, 2010 10:56 am
Location: netherlands

Re: NEXT K9 PG2 and rfxcom

Post by labium »

i dont think the alphatronics visonic 868 receiver can receive pg2 signals, but for the others it is a good receiver, i will try to get my hands on one , digi even wrote code for it
Herbus
Member
Member
Posts: 363
Joined: Mon Mar 27, 2006 12:28 pm
Location: Netherlands

Re: NEXT K9 PG2 and rfxcom

Post by Herbus »

The PG2 detectors can't be received by the Visonic 868 receiver because it's 2-way communication. The old PowerCode detectors are one-way.
Herbus (Jos)
labium
Advanced Member
Advanced Member
Posts: 512
Joined: Sat Feb 06, 2010 10:56 am
Location: netherlands

Re: NEXT K9 PG2 and rfxcom

Post by labium »

so it could be possible with a pi or arduino and a 868 module ?
Herbus
Member
Member
Posts: 363
Joined: Mon Mar 27, 2006 12:28 pm
Location: Netherlands

Re: NEXT K9 PG2 and rfxcom

Post by Herbus »

It’s not possible to connect a PG2 component because it’s two-way encrypted communication.
For the older powercode detectors there are several solutions.


Verzonden vanaf mijn iPhone met Tapatalk Pro
Herbus (Jos)
Post Reply

Return to “Visonic Alarm systems”