Toon not booting after failed update

[MadDemonoide]

Hey.

I tried doing a software update, and the power fell out during the update.
I can access SSH, and the screen is stuck at the T logo.

I tried using the update script, but it cannot seem to connect to the vpn. The keys are in the vpn folder.

What can i do?

Thanks

[TerrorSource]

can you try the update script as followed:
sh update-rooted.sh -v 4.19.10

and tell us wat happens

[marcelr]

So it is booting.

You can test whether vpn is started by typing

Code: Select all

ps | grep vpn

If that gives no output (or nothing useful) you can start vpn manually by copying the command part of the openvpn line from /etc/inittab into the ssh console and run it.

[MadDemonoide]

Hey. With the forcing it is still waiting for VPN to be alive. See the screenshot.

Thank you

[MadDemonoide]

As far as I can see it is running.
I see the line and the conf file defined there.

So it is booting.

You can test whether vpn is started by typing

Code: Select all

ps | grep vpn

If that gives no output (or nothing useful) you can start vpn manually by copying the command part of the openvpn line from /etc/inittab into the ssh console and run it.

[TerrorSource]

Hey. With the forcing it is still waiting for VPN to be alive. See the screenshot.

Thank you

Just keep trying a few times. had that once before too.
Also, check the /etc/inittab if it's not empty.

[MadDemonoide]

I tried a few times now. Nothing changes.

The inittab is not empty. The openvpn item is there. Uncommented.

Hey. With the forcing it is still waiting for VPN to be alive. See the screenshot.

Thank you

Just keep trying a few times. had that once before too.
Also, check the /etc/inittab if it's not empty.

[marcelr]

In that case, you should be able to ping feed.hae.int, and get a response.

[MadDemonoide]

In that case, you should be able to ping feed.hae.int, and get a response.

I’m not getting a response from that URL.

[marcelr]

try

Code: Select all

ping 8.8.8.8

(google) then.
If that doesn't give a response, you don't have a working connection to the outside world.

[MadDemonoide]

In that case, you should be able to ping feed.hae.int, and get a response.

When I try to manually start the VPN, I get the following:

Code: Select all

Socket bind failed on local address. [AF_ INET]127.0.0.1:8000 Address already in use.

[MadDemonoide]

try

Code: Select all

ping 8.8.8.8

(google) then.
If that doesn't give a response, you don't have a working connection to the outside world.

I tried google. I get a nice ping back.

[marcelr]

Maybe you should edit inittab to not start openvpn, then kill it, and let the script do it for you.

[TheHogNL]

I think you have a very old version of Toon firmware which doesn't update the /etc/hosts file properly (your feed.hae.int entry in your hosts file doesn't match with the routing table)
Try to remove the "feed.hae.int" line from the /etc/hosts file and restart the Toon and the script again.

[MadDemonoide]

Maybe you should edit inittab to not start openvpn, then kill it, and let the script do it for you.

I can start the VPN manually, but it still does not update.
It also shows up @ the top command as a process.