I just rooted my second toon. Everything went well, u-boot version is 2010.09-R8, so entering with password was enough enter console.
My toon was booting just fine after the final ssh server installation. I was able to connect ssh through wifi.
Then i decided it was a good idea to run the update-rooted.sh script from hxxps://github.com/IgorYbema/update-rooted.
because i was allready on 4.19.10 i ran the script with -f option. so only improvements were applied.
All went well i think, i did not pay good enough attention to console messages. After all was done i rebooted my toon.
Now this is the message:
Code: Select all
rtc-isl1208 1-006f: setting system clock to 2018-09-12 20:43:09 UTC (1536784989)
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 117833728 bytes (115072 KiB, 112 MiB, 928 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:13.
Freeing init memory: 104K
usb 2-1: new high speed USB device using mxc-ehci and address 2
INIT: version 2.86 bootingusb 2-1: New USB device found, idVendor=148f, idProduct=5370
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: 802.11 n WLAN
usb 2-1: Manufacturer: Ralink
usb 2-1: SerialNumber: 1.0
Enter runlevel:
I even am able to run the update_rooted.sh script (but without wifi no downloads - so no complete update).