NaN values toon Smartmeter in Home Assistant

If your (rooted) Toon doesn't do what it's supposed to, post here. Dutch allowed / Posten in 't Nederlands toegestaan.

Moderators: marcelr, TheHogNL, Toonz

Post Reply
paegan
Starting Member
Starting Member
Posts: 4
Joined: Mon Dec 24, 2012 3:08 pm

NaN values toon Smartmeter in Home Assistant

Post by paegan »

Hello,

i have climate and boiler working in HA, but the smartmeter part just keeps giving NaN sensor values.
I use the code from cyberjunkie, but also tried m-Aiden his code and from some other GitHub contributors.
I now HA connects to the Toon, because i get a NaN value, if i connect with a wrong IP adress, i get no values (-).
In the logs i get no errors.

I've search the webs extensively, as well as this board, but found no apparent solution.
I hope You wizards can help me in my Quest.

Regards Freddie
User avatar
esschenk
Member
Member
Posts: 426
Joined: Sun Feb 17, 2008 10:34 pm
Location: Netherlands
Contact:

Re: NaN values toon Smartmeter in Home Assistant

Post by esschenk »

Hello,

I have the same problem with Homeseer.
I use a script to rip the values from the PVoutput page.

Opbrengst nu 207 Watt
Opgewekte vandaag 2.403 Watt
Opgewekt deze week NaN Watt
Opgewekt deze maand 21.347 Watt

ED
TerrorSource
Administrator
Administrator
Posts: 494
Joined: Thu May 04, 2017 9:28 pm

Re: NaN values toon Smartmeter in Home Assistant

Post by TerrorSource »

Could you check if you can see the temperature via http://TOON-IP/happ_thermstat?action=getThermostatInfo
If so, the error is caused by the scripts or systems you are using.
paegan
Starting Member
Starting Member
Posts: 4
Joined: Mon Dec 24, 2012 3:08 pm

Re: NaN values toon Smartmeter in Home Assistant

Post by paegan »

that was a helpfull hint terrorsource, thnx.
It turned out that that url did work.

So i did something drastic.
Made a new test environment for Hassio.
And from a clean start i first added the rooted toon to the config.
To my surprise, that word flawlessly, also did the smartmeter an boiler worked in the first try.

So i builded a new Hassio instance round this config, added, tested, added some more tested again.
Until the point where i have now a fully working environment, with all the addons i want to use, and toon works like a charm.

No idea whatsoever why the other way around did not wanted to work, but it works now, that will do.

Thanks for the pointer.
Post Reply

Return to “Toon issues and support (Nederlands toegestaan)”