Meteradapter research - Help needed

Forum about Toon hardware, both versions 1 and 2 of Toon

Moderators: marcelr, TheHogNL, Toonz

Post Reply
TerrorSource
Administrator
Administrator
Posts: 494
Joined: Thu May 04, 2017 9:28 pm

Meteradapter research - Help needed

Post by TerrorSource »

Hi Guys,

I'm doing a research on which meteradapter works with what smart meter and what functionality is availble for which type of meteradapter.

Could you all please fill in the following Google Forms to help me?

No personal data is asked or saved.

https://forms.gle/5HPHDCBuVwFwsBMT8

---

Hallo iedereen,

Ik ben aan het onderzoeken welke meteradapter met welke slimme meter werkt en welke functionaliteit er beschikbaar is voor welk type meteradapter.

Zouden jullie mij willen helpen door onderstaand Google Forms formulier in te vullen?

Er worden geen persoonlijke gegevens gevraagd of opgeslagen.

https://forms.gle/5HPHDCBuVwFwsBMT8
TerrorSource
Administrator
Administrator
Posts: 494
Joined: Thu May 04, 2017 9:28 pm

Re: Meteradapter research - Help needed

Post by TerrorSource »

Bump :) only received a couple of replies.
Please help me research the meteradapter more
Toonz
Forum Moderator
Forum Moderator
Posts: 1873
Joined: Mon Dec 19, 2016 1:58 pm

Re: Meteradapter research - Help needed

Post by Toonz »

what do you expect to learn from this?
Isn't the only question which meteradapter supports Zon op Toon (and we know this already)?
member of the Toon Software Collective
marcelr
Global Moderator
Global Moderator
Posts: 1153
Joined: Thu May 10, 2012 10:58 pm
Location: Ehv

Re: Meteradapter research - Help needed

Post by marcelr »

Years ago I compiled a small list for the (then available) meter adapters and corresponding firmwares:

viewtopic.php?f=101&t=8743&start=255#p79033

Only the 6500-1400-6000 type in this list supports Zon op Toon. Later versions all support it.
TerrorSource
Administrator
Administrator
Posts: 494
Joined: Thu May 04, 2017 9:28 pm

Re: Meteradapter research - Help needed

Post by TerrorSource »

Toonz wrote:what do you expect to learn from this?
Isn't the only question which meteradapter supports Zon op Toon (and we know this already)?
And which meteradapter works with what type of smart meter.
As a Kaifa MA105A can work with all types of meteradapter while a Landis Gyr E350 is picky and only works with meteradapters with support for DSMR 5.0 and newer.
hansgrave
Starting Member
Starting Member
Posts: 49
Joined: Sat Dec 23, 2017 12:42 pm

Re: Meteradapter research - Help needed

Post by hansgrave »

Done, firmwareversion of the Meteradapter was hard to find... Instellingen-->Energiemeting-->Meetmodules-->Meetmodule 1
Homey, rooted Toon 1 and HomeAssistent.
Templar
Member
Member
Posts: 178
Joined: Fri Mar 18, 2011 8:49 pm
Location: Netherlands

Re: Meteradapter research - Help needed

Post by Templar »

TerrorSource wrote:
Toonz wrote:what do you expect to learn from this?
Isn't the only question which meteradapter supports Zon op Toon (and we know this already)?
And which meteradapter works with what type of smart meter.
As a Kaifa MA105A can work with all types of meteradapter while a Landis Gyr E350 is picky and only works with meteradapters with support for DSMR 5.0 and newer.
So the deal is to know which smart meters and meteradapters run on DSMR 5.0?
TerrorSource
Administrator
Administrator
Posts: 494
Joined: Thu May 04, 2017 9:28 pm

Re: Meteradapter research - Help needed

Post by TerrorSource »

Templar wrote:
TerrorSource wrote:
Toonz wrote:what do you expect to learn from this?
Isn't the only question which meteradapter supports Zon op Toon (and we know this already)?
And which meteradapter works with what type of smart meter.
As a Kaifa MA105A can work with all types of meteradapter while a Landis Gyr E350 is picky and only works with meteradapters with support for DSMR 5.0 and newer.
So the deal is to know which smart meters and meteradapters run on DSMR 5.0?
Not only that, i used that for an example.
Mostly i would like to know which meteradapter works with what smart meter as not all meteradapters work with all smart meters.
NLKris
Starting Member
Starting Member
Posts: 33
Joined: Sat Jan 26, 2019 4:16 am

Re: Meteradapter research - Help needed

Post by NLKris »

So I tought that if there were 2 flames on the 'meetmodule' you'll be fine with the Smartmeter. Later I found out that some 1 flame meters are also working.

Since last month I made a list for myself. If i'm right I got a Smart Meter with protocol 3.0 or 4.0? (Have a Kaifa E0025)
Anyways, this is the info I got:

1 flame WORKING:
6500-1300-7200
*I had ever one older than 6500-1300-7200, that was the one not working. The difference was in firmware, but I did not write that down...

2 flame WORKING:
6599-1500-0201
6599-1700-0600
6599-1700-0602
*Think that newer will work too/all the 2 flames wil work on mine.
Post Reply

Return to “Toon Hardware”