Dont know where to ask this question, but cant hurt to ask here.
Is the P1 cable required for the Toon1 (Meter-adapter) the same as a telephone wire with RJ11 connector?
Or is it a whole different cable?
I need a 5+ meter cable for my installation, curious how to make one of my own.
I read allot of forum where they make P1 cable for a RPi with a USB A on one end, but that is not required for the Toon.
P1 Cable for Toon = telefoon cable?
-
- Starting Member
- Posts: 6
- Joined: Sun Oct 17, 2021 5:09 pm
-
- Starting Member
- Posts: 6
- Joined: Sun Oct 17, 2021 5:09 pm
Re: P1 Cable for Toon = telefoon cable?
Okey, so after some testing I can confirm the following:
Toon, needs a P1 cable, which is nothing more than a regular old telephone cable with RJ11 on both sides.
For some reason, the Meter-adapter (big plastic adapter with socket plug) didnt work/connect with the Toon after pressing the side button on a few time.
I've read somewhere that you need to make sure the adapter/toon is unlinked/disconnected from previous adapters before you can connect it with a new one.
So in the setting-measureing module (middle one nest to www.) you can connect one and also disconnect previous adapters.
Toon, needs a P1 cable, which is nothing more than a regular old telephone cable with RJ11 on both sides.
For some reason, the Meter-adapter (big plastic adapter with socket plug) didnt work/connect with the Toon after pressing the side button on a few time.
I've read somewhere that you need to make sure the adapter/toon is unlinked/disconnected from previous adapters before you can connect it with a new one.
So in the setting-measureing module (middle one nest to www.) you can connect one and also disconnect previous adapters.