Home Automation Domotica Forum Europe, Bwired Forum

Hello Fringui (sorry to others because of italian language), but you're making the device for the meter ITALGAS? PS: but you're the Fringui that attend forum EOLO?

Yes, eolo forum, I am making the device to counter the classic, I enelenergia, but I think that the meter is the Italian classic, I have not yet examined whether its the silver in fact, when I made the circuit because I was curious ..
PS the forum eolo un botto that do not read and did not attend .. too many forums to follow

ehe parlare englese

no problem for now

Sorry me too , domotic Guys! It's so nice to find in a domotic dutch forum someone that lives some kms near you. This could help me , because i see that fringui is a good technician and has same hardware meters. Thanks again to everybody. Lorenzo, from Luino ( @Fringui , did you think how to monitor Enel power meter?)

For the enel power meter at start i suppose to use a system like bwired... but i found this object (http://cgi.ebay.it/Contatore-elettronic ... 240%3A1318) e i connect S0 to hobby board dual counter
It's more simply...

wow.. my english it's very poor of word

Dear "Fringui"
1- The italian ENI-gas meter does not have the reflecting label in the 6-digit as Bwired in NL; the only solution is a small webcam connected to a microprocessor; today I was not able to find a simple circuit;
2- to monitor the line power usage, take a look at the "Elettronica IN 131,133,134"; the projects use the MCP39005A and the PIC16F876A; also in the 134 on page 11 there is a simple circuit that reads the flashing red led of the italian ENEL-power-meter.

noooooooo really?!?!?!
That's not good News..

Now i read the power-line in simple mode.. with ebay object and 1wire dual counter.

Thanks for info.

@Amelia, as usual all projects in Eleetronica In are referred to kit sold by Futurashop that i know very well. Do you think that i could find a "ready to use" example of this device? Then , this device reads data but what about to send this data to a pc?

Dear <b>drmacchi</b>
In the issue n.133 the project uses a PIC16F876A that sends the information to a break box,issue n.134, with a radio link.
If you are able to program in C language, you can modify the source-program to send the message to a PC with the serial port (COM1) or better with USB.
As a registered visitor you can download the PCB master CS133 and the source SG134; the project is not a kit.

Thanks Amelia. That's hard because of "not able to program"! i was looking for a device ready to use with pc output capabilities.

Wow.. today i see a small wheel with a little iron part... i do not use gas in this days... the i don't know how many comes around... but this is my next project

Thats the one you need I guess

This is the first release of my "house control"

thats look nice

How is it talking with your home system?

Waarom zelf het wiel nog een keer uitvinden.

Thanks, i making a software server in delphi to read all sensor, it's write in mysql DB and client read mysql data.