Page 2 of 2
BWR102 scales with WL500-GP running OpenWRT
Posted: Thu Jan 08, 2009 2:15 am
by Mr.Ed
Hey Kroon,
I managed to install a package of Heyu on my OpenWRT box. I am completely new with Heyu. Could you give some more hints on this? Would it need the special module you mentioned?
Tnx,
Ed.
------------------------------------
So many projects and so little time...
BWR102 scales with WL500-GP running OpenWRT
Posted: Thu Jan 08, 2009 3:50 pm
by Kroonen
What version doe you have 2.4?
Send me a pm with your mail that i can send you a prebuid of 2.5
you must have in x10.conf something like this
TTY_AUX /dev/ttyS0 RFXCOM
RFXCOM_ENABLE OREGON
ALIAS weight L14 ORE_WGT1 <id here>
see man x10oregon
BWR102 scales with WL500-GP running OpenWRT
Posted: Thu Jan 08, 2009 6:28 pm
by Mr.Ed
Unfortunally, I have version 2.3.2-1.
It is located here:
http://downloads.openwrt.org/kamikaze/8 ... /packages/
I installed it with OPKG. I have little experience with compiling, so i would have to search for a newer package. But i won't give up on it, just yet...
I couldn't find a way to PM you, but you could reach me via my homepage button. You can find my mailadres on that page.
I appreciate it very much, that you took time to help me out.
Best regards,
Ed.
------------------------------------
So many projects and so little time...