Page 2 of 2
Dutch Home Easy Devices (HE302EU)
Posted: Thu Dec 04, 2008 2:15 pm
by HeinrichH
-Set the HE302EU in learning mode by pushing the little switch. Led starts blinking for about 10 seconds
Try to program the receiver with an ordinary Klikaan/Klikuit handtransmitter, I've bought some HomeEasy devices in England and had also problems with programming direct with the RFXcom, after programming with a hand transmitter the receivers are working with the RFXcom transmitter
Dutch Home Easy Devices (HE302EU)
Posted: Thu Dec 04, 2008 5:43 pm
by b_weijenberg
The HomeEasy EU version is different from the UK version!
I have to analyze the EU protocols.
The UK versions can be programmed directly using the RFXCOM transmitter and don't need to be programmed with a remote.
Bert
Dutch Home Easy Devices (HE302EU)
Posted: Fri Dec 05, 2008 8:25 am
by flexer
Hi, Bert! Did you buy a HE302EU yourself and came to the same conclusion as I did?
Flexer
Dutch Home Easy Devices (HE302EU)
Posted: Fri Dec 05, 2008 9:27 am
by b_weijenberg
Yes, I bought a few different modules to test with and only 1 remote and found that the protocol is completely different. I have to start from the beginning again
Bert
Dutch Home Easy Devices (HE302EU)
Posted: Sat Dec 20, 2008 6:05 pm
by ekouwen
Bert, did you already progress on this?
Dutch Home Easy Devices (HE302EU)
Posted: Sat Dec 20, 2008 9:33 pm
by b_weijenberg
Yes, the HomeEasu EU devices will be supported soon by a new receiver version.
I will also create a transmitter but I have to study how to integrate this.
Dutch Home Easy Devices (HE302EU)
Posted: Sun Dec 21, 2008 10:23 am
by ekouwen
OK Thanks, looking forward to it!
Dutch Home Easy Devices (HE302EU)
Posted: Thu Feb 19, 2009 8:57 pm
by ekouwen
Hi Bert, already any News on this topic?