Home Automation Domotica Forum Europe, Bwired Forum

esschenk wrote:http://online.kruidvat.nl/product/10103 ... 1393349920

ed

Ik heb er twee bij de trekpleister vandaan (zelfde organisatie) en deze werken. Er stond Flamingo op het doosje en die werken standaard

Thats nice iam going to buy 4 to replace my old ones

thanks Ed

Are these supported on the old RFXCOM receiver?

Ysbrand

I they are the FS20RF i think they are.

The latest firmware versions support the KD101 (not the Alecto SA30)
;Version 55 and 56
; HE EU set level supported
;Version 53 and 54
; Chacon/Avidsen/NEXA.. KD101 smoke detector added

For an update contact support

esschenk wrote:http://online.kruidvat.nl/product/10103 ... 1393349920

ed

Online al uitverkocht

Is het zeker dat deze Elro rookmelders ondersteunt worden door RFXcom?

Vanochtend nog 4 besteld en zijn vandaag al op de post gegaan. Misschien krijgen ze er weer meer.

Bastiaan wrote:Vanochtend nog 4 besteld en zijn vandaag al op de post gegaan. Misschien krijgen ze er weer meer.

Check, dus deze werken ook met RFXcom?

Hoe werken ze?
Hebben ze een status update oid?

Kan me voorstellen.
Hij gaat af?
Maar iets mist zijn uit signaal?

Word ik dan gek

Ik heb twee van deze bij de trekpleister gekocht, die werken met RFXcom en de oude HS2 RFXcom plugin


Ik heb ook de SA-30 gehad, en die werken alleen met de HS3 RFXcom plugin

Today my daughter has bring my Smoke detectors
(she is working by the Kruidvat)
Even the batteries are included.
Installed the detectors and the are working right away within HS

Ed

I've got only RFXLAN sets 2x V1 and 1x v3 so not sure if this is going to work. I got them today and indeed are called FA20RF made in 2013.
Ed, how did you identify them and in which section of RFXCOM?

Hello,

I have an Rfxlan and an RfxTrx
HS is seeing a remote control:KR10/21/SH624/MCT234/HP564/KD101 Remote
I have not tried an alarm trigger maybe this weekend
Ed.

I have one set with 2 detectors bought by Kruitvat, on the box is the tekst Flamingo, FA20RF and KD-101LD. HS2 is seeing indeed
the smoke detector as KR10/21/SH624/MCT234/HP564/KD101 Remote, I use the add function in the rfxcom tab (security).

So it is possible to add the detector in HS2, but I noticed that I could not add a second one, it seems that they use the same adress
when one is added in HS2 the other one also is working in HS2. The problem with this is that I could not add the detectors to different
rooms in the house.

Is above the right way to add the detectors?

You can create a KD101 Output device with a different ID. Using the RFXtrx433 you can pair this KD101 with the Output device and assign another ID.