Page 2 of 2
New with Domotica and security and need advice.
Posted: Tue Mar 25, 2008 10:23 pm
by aeh
Can I use the same Visonic alarm devices to control the lights?
And another question, can I receive the device signals with Homeseer?
New with Domotica and security and need advice.
Posted: Tue Mar 25, 2008 10:31 pm
by TANE
You can control lights with Visonic...but this is slow about 2 seconds before the light will turn on.
I'm using this for the main lights in my house.
There are two methods to get the Visonic info in Homeseer.
Via XM10x directly connected to the Powermax (limitation of 15 devices)
or via RFXcom Visonic receiver
New with Domotica and security and need advice.
Posted: Tue Mar 25, 2008 10:37 pm
by aeh
So the RFXcom Visonic receiver is the best option?
Can you tell me what the best shop is to buy the Powermax + and do I need the MCM-140.
New with Domotica and security and need advice.
Posted: Tue Mar 25, 2008 10:50 pm
by TANE
RFXcom will give you more flexibility.
You can also use the Visnoc Key for controlling other devices.
I don't use any keypad..If you like to use one..you can better go for the MKP-150 with status display.
Best option is to buy more keyfob's they are easy to use and cheap..29,50
check the website Waakzaamwonen in Utrecht
http://www.waakzaamwonen.nl/catalog/ind ... ermax-plus
New with Domotica and security and need advice.
Posted: Tue Mar 25, 2008 10:59 pm
by aeh
Thanks for your advice Chak.
New with Domotica and security and need advice.
Posted: Tue Mar 25, 2008 11:06 pm
by TANE
yw
Send you floor plan to waakzaamwonen they will advise you about the products and the location's
New with Domotica and security and need advice.
Posted: Wed Mar 26, 2008 12:44 pm
by Wima
Here is another on-line floor planner:
http://www.metropix.co.uk/mtpix/index.aspx
Wil