Home Automation Domotica Forum Europe, Bwired Forum

Domotica - Home Automation Forum
https://www.domoticaforum.eu/

Warmte uitlezen

https://www.domoticaforum.eu/viewtopic.php?t=12246

Page 3 of 3

Re: Warmte uitlezen

Posted: Sun Feb 10, 2019 12:33 pm
by sylvesterrr
marcelr wrote:Mooi.

Volgende vraag:
Kun je posten wat de output van dit commando is:

Code: Select all

grep -A 3 firmware-ma /usr/lib/opkg/status | grep Version
(meteradapter firmware package versie)

Code: Select all

Version: 1.143-master

Re: Warmte uitlezen

Posted: Sun Feb 10, 2019 12:46 pm
by marcelr
Dank je, da's positief, betekent dat de firmware in elk geval bijgehouden wordt.
(en we gericht kunnen gaan zoeken hoe we e.e.a. op een ander type meteradapter geflashed krijgen).
Nog een vraag die me te binnen schiet:
Kun je een foto plaatsen van het scherm "Produktversie"?

Re: Warmte uitlezen

Posted: Sun Feb 10, 2019 12:55 pm
by sylvesterrr
marcelr wrote:Dank je, da's positief, betekent dat de firmware in elk geval bijgehouden wordt.
(en we gericht kunnen gaan zoeken hoe we e.e.a. op een ander type meteradapter geflashed krijgen).
Nog een vraag die me te binnen schiet:
Kun je een foto plaatsen van het scherm "Produktversie"?
Tuurlijk. :)

Re: Warmte uitlezen

Posted: Sun Feb 10, 2019 1:00 pm
by marcelr
Type 4900, dacht ik al. Nu eens even zoeken welke hardware hetzelfde is (er is een heel scala aan hardwaremodellen voor die meteradapters).
Laatste vraag (voorlopig):

Heeft je toon en directory /qmf/etc/firmware_ma/ en zo ja, wat zit daarin?
(als het goed is de binaries voor de firmware specifiek voor je meteradapter)

Re: Warmte uitlezen

Posted: Sun Feb 10, 2019 1:08 pm
by sylvesterrr
marcelr wrote:Type 4900, dacht ik al. Nu eens even zoeken welke hardware hetzelfde is (er is een heel scala aan hardwaremodellen voor die meteradapters).
Laatste vraag (voorlopig):

Heeft je toon en directory /qmf/etc/firmware_ma/ en zo ja, wat zit daarin?
(als het goed is de binaries voor de firmware specifiek voor je meteradapter)
Geen firmware_ma, maar wel firmware_ba.

Code: Select all

eneco-001-09xxxx:/qmf/etc# ls -lh
lrwxrwxrwx    1 root     root          24 Oct  8  2017 env -> /mnt/persist/qmf/etc/env
drwxr-xr-x    2 root     root         488 Feb  7 08:23 firmware_ba
drwxr-xr-x    2 root     root         320 Feb  7 08:37 hdrv_p1
drwxr-xr-x    4 root     root         432 Nov 28 10:07 lighttpd
-rw-r--r--    1 www-data www-data    1.7K Jan 10 11:43 qmf_hardware.xml
-rw-r--r--    1 www-data www-data   26.3K Feb  7 15:18 qmf_release.xml
-rw-r--r--    1 root     root       26.3K Feb  7 15:17 qmf_release.xml.toonstore_backup
-rw-r--r--    1 root     root        1.5K Feb  7 15:18 qmf_tenant.xml
-rw-r--r--    1 root     root        2.4K Feb  7 15:17 qmf_tenant.xml.save
drwxr-xr-x    2 root     root        1.3K Sep  3 13:43 start.d
-rw-r--r--    1 root     root         626 Nov 28 13:55 tenant-dict.json
Gezocht op firmware_ma, dan vind ik /qmf/dta/firmware_ma:

Code: Select all

eneco-001-09xxxx:~# find / -name *firmware_ma*
/qmf/data/firmware_ma
find: /proc/30684: No such file or directory
eneco-001-09xxxx:~# ls -lhR /qmf/data/firmware_ma
/qmf/data/firmware_ma:
drwxr-xr-x    2 root     root         344 Feb  7 08:21 200000001500
drwxr-xr-x    2 root     root         400 Feb  7 08:21 650011003300
drwxr-xr-x    2 root     root         320 Feb  7 08:21 650011020400
drwxr-xr-x    2 root     root         320 Feb  7 08:21 650012004700
drwxr-xr-x    2 root     root         320 Feb  7 08:21 650014004900
drwxr-xr-x    2 root     root         320 Feb  7 08:21 650014006000
-rw-r--r--    1 root     root        6.4K Oct  9 12:24 firmwareItems.xml
drwxr-xr-x    2 root     root         256 Feb  7 08:21 gecosense

/qmf/data/firmware_ma/200000001500:
-rwxr-xr-x    1 root     root       92.2K Oct  9 12:24 firmware_mm-zwave_mm_ota-1.4.12.bin
-rwxr-xr-x    1 root     root       29.5K Oct  9 12:24 firmware_mm_ota-0.30.6.bin

/qmf/data/firmware_ma/650011003300:
-rw-r--r--    1 root     root       32.0K Oct  9 12:24 POC6500110110R19.bin
-rw-r--r--    1 root     root       32.0K Oct  9 12:24 POC6500110110R21.bin
-rw-r--r--    1 root     root       31.9K Oct  9 12:24 POC6500110113R14.bin

/qmf/data/firmware_ma/650011020400:
-rw-r--r--    1 root     root       32.0K Oct  9 12:24 POC6500110110R37.bin
-rw-r--r--    1 root     root       31.9K Oct  9 12:24 POC6500110113R35.bin

/qmf/data/firmware_ma/650012004700:
-rw-r--r--    1 root     root       32.0K Oct  9 12:24 POC6500110110R39.bin
-rw-r--r--    1 root     root       31.9K Oct  9 12:24 POC6500110113R34.bin

/qmf/data/firmware_ma/650014004900:
-rw-r--r--    1 root     root       31.9K Oct  9 12:24 POC6500110278R04.bin
-rw-r--r--    1 root     root       32.0K Oct  9 12:24 POC6500110284R04.bin

/qmf/data/firmware_ma/650014006000:
-rw-r--r--    1 root     root       17.1K Oct  9 12:24 ma-lpc-013-ota.bin
-rw-r--r--    1 root     root       92.1K Oct  9 12:24 ma-zwave-025-ota.bin

/qmf/data/firmware_ma/gecosense:
-rw-r--r--    1 root     root       27.6K Oct  9 12:24 GECOSENS-Application-v001.004.bin

Re: Warmte uitlezen

Posted: Sun Feb 10, 2019 1:12 pm
by sylvesterrr
Even een dump van firmwareItems.xml in die folder.

Code: Select all

eneco-001-09xxxx:/qmf/data/firmware_ma# cat firmwareItems.xml
<Config>
        <firmwareItems>
                <firmwareUpdate>
                        <type>ZWAVE</type>
                        <hardwareVersions>
                                <hardwareVersion>650011003301</hardwareVersion>
                                <hardwareVersion>650011003302</hardwareVersion>
                                <hardwareVersion>650011003303</hardwareVersion>
                        </hardwareVersions>
                        <fileName>650011003300/POC6500110113R14.bin</fileName>
                        <version>R14</version>
                        <firmId1>0x13</firmId1>
                        <firmId2>0x0E</firmId2>
                        <checkSum1>0xBE</checkSum1>
                        <checkSum2>0x29</checkSum2>
                </firmwareUpdate>

                <firmwareUpdate>
                        <type>LPC</type>
                        <hardwareVersions>
                                <hardwareVersion>650011003301</hardwareVersion>
                                <hardwareVersion>650011003302</hardwareVersion>
                                <hardwareVersion>650011003303</hardwareVersion>
                        </hardwareVersions>
                        <fileName>650011003300/POC6500110110R21.bin</fileName>
                        <version>R21</version>
                        <firmId1>0x10</firmId1>
                        <firmId2>0x15</firmId2>
                        <checkSum1>0x55</checkSum1>
                        <checkSum2>0x03</checkSum2>
                </firmwareUpdate>

                <firmwareUpdate>
                        <type>ZWAVE</type>
                        <hardwareVersions>
                                <hardwareVersion>650011020400</hardwareVersion>
                                <hardwareVersion>650011020401</hardwareVersion>
                        </hardwareVersions>
                        <fileName>650011020400/POC6500110113R35.bin</fileName>
                        <version>R35</version>
                        <firmId1>0x13</firmId1>
                        <firmId2>0x23</firmId2>
                        <checkSum1>0x9E</checkSum1>
                        <checkSum2>0x28</checkSum2>
                </firmwareUpdate>

                <firmwareUpdate>
                        <type>LPC</type>
                        <hardwareVersions>
                                <hardwareVersion>650011020400</hardwareVersion>
                                <hardwareVersion>650011020401</hardwareVersion>
                        </hardwareVersions>
                        <fileName>650011020400/POC6500110110R37.bin</fileName>
                        <version>R37</version>
                        <firmId1>0x10</firmId1>
                        <firmId2>0x25</firmId2>
                        <checkSum1>0xE5</checkSum1>
                        <checkSum2>0x83</checkSum2>
                </firmwareUpdate>

                <firmwareUpdate>
                        <type>ZWAVE</type>
                        <hardwareVersions>
                                <!-- For PN's 6500120047XX-->
                                <hardwareVersion>6500120047</hardwareVersion>
                                <hardwareVersion>650013007200</hardwareVersion>
                        </hardwareVersions>
                        <fileName>650011020400/POC6500110113R35.bin</fileName>
                        <version>R35</version>
                        <firmId1>0x13</firmId1>
                        <firmId2>0x23</firmId2>
                        <checkSum1>0x9E</checkSum1>
                        <checkSum2>0x28</checkSum2>
                </firmwareUpdate>

                <firmwareUpdate>
                        <type>LPC</type>
                        <hardwareVersions>
                                <!-- For PN's 6500120047XX-->
                                <hardwareVersion>6500120047</hardwareVersion>
                                <hardwareVersion>650013007200</hardwareVersion>
                        </hardwareVersions>
                        <fileName>650012004700/POC6500110110R39.bin</fileName>
                        <version>R39</version>
                        <firmId1>0x10</firmId1>
                        <firmId2>0x27</firmId2>
                        <checkSum1>0xE8</checkSum1>
                        <checkSum2>0x2A</checkSum2>
                </firmwareUpdate>

                <firmwareUpdate>
                        <type>ZWAVE</type>
                        <hardwareVersions>
                                <hardwareVersion>650014004900</hardwareVersion>
                        </hardwareVersions>
                        <fileName>650014004900/POC6500110278R04.bin</fileName>
                        <version>R36</version>
                        <firmId1>0x13</firmId1>
                        <firmId2>0x24</firmId2>
                        <checkSum1>0x41</checkSum1>
                        <checkSum2>0xBA</checkSum2>
                </firmwareUpdate>

                <firmwareUpdate>
                        <type>LPC</type>
                        <hardwareVersions>
                                <hardwareVersion>650014004900</hardwareVersion>
                        </hardwareVersions>
                        <fileName>650014004900/POC6500110284R04.bin</fileName>
                        <version>R43</version>
                        <firmId1>0x10</firmId1>
                        <firmId2>0x2B</firmId2>
                        <checkSum1>0xC8</checkSum1>
                        <checkSum2>0x63</checkSum2>
                </firmwareUpdate>

                <!-- Quby firmware for Z-Wave 500-series MA -->
                <firmwareUpdate>
                        <type>ZWAVE</type>
                        <hardwareVersions>
                                <hardwareVersion>650014006000</hardwareVersion>
                                <hardwareVersion>659915000201</hardwareVersion> <!-- Quby customer PN -->
                                <hardwareVersion>659917000600</hardwareVersion> <!-- without tenant logo -->
                                <!-- <hardwareVersion>659917000601</hardwareVersion> NOTE: only enable once OTA update is needed (025 has no AT25PE20 support) -->
                                <!-- <hardwareVersion>659917000602</hardwareVersion> NOTE: only enable once OTA update is needed (025 has no AT25PE20 support) -->
                        </hardwareVersions>
                        <fileName>650014006000/ma-zwave-025-ota.bin</fileName>
                        <versionName>R025</versionName>
                        <firmId1>0x02</firmId1>
                        <firmId2>0x01</firmId2>
                        <version>0x00</version>
                        <subVersion>0x19</subVersion>
                        <checkSum1>0x5B</checkSum1>
                        <checkSum2>0x1A</checkSum2>
                </firmwareUpdate>

                <firmwareUpdate>
                        <type>LPC</type>
                        <hardwareVersions>
                                <hardwareVersion>650014006000</hardwareVersion>
                                <hardwareVersion>659915000201</hardwareVersion> <!-- Quby customer PN -->
                                <hardwareVersion>659917000600</hardwareVersion> <!-- without tenant logo -->
                                <!-- <hardwareVersion>659917000601</hardwareVersion> NOTE: only enable once OTA update is needed (025 has no AT25PE20 support) -->
                                <!-- <hardwareVersion>659917000602</hardwareVersion> NOTE: only enable once OTA update is needed (025 has no AT25PE20 support) -->
                        </hardwareVersions>
                        <fileName>650014006000/ma-lpc-013-ota.bin</fileName>
                        <versionName>R013</versionName>
                        <firmId1>0x02</firmId1>
                        <firmId2>0x10</firmId2>
                        <version>0x00</version>
                        <subVersion>0x0D</subVersion>
                        <checkSum1>0x59</checkSum1>
                        <checkSum2>0xC5</checkSum2>
                </firmwareUpdate>

                <!-- Quby firmware for Meter Module -->
                <firmwareUpdate>
                        <type>ZWAVE</type>
                        <hardwareVersions>
                                <hardwareVersion>200000001500</hardwareVersion>
                        </hardwareVersions>
                        <fileName>200000001500/firmware_mm-zwave_mm_ota-1.4.12.bin</fileName>
                        <versionName>R1.4.12</versionName>
                        <firmId1>0x03</firmId1>
                        <firmId2>0x01</firmId2>
                        <version>0x01</version>
                        <subVersion>0x04</subVersion>
                        <checkSum1>0x31</checkSum1>
                        <checkSum2>0xFE</checkSum2>
                </firmwareUpdate>

                <firmwareUpdate>
                        <type>LPC</type>
                        <hardwareVersions>
                                <hardwareVersion>200000001500</hardwareVersion>
                        </hardwareVersions>
                        <fileName>200000001500/firmware_mm_ota-0.30.6.bin</fileName>
                        <versionName>R030</versionName>
                        <firmId1>0x03</firmId1>
                        <firmId2>0x10</firmId2>
                        <version>0x00</version>
                        <subVersion>0x1E</subVersion>
                        <checkSum1>0xC8</checkSum1>
                        <checkSum2>0x64</checkSum2>
                </firmwareUpdate>

                <firmwareUpdate>
                                <type>GECOSENSE</type>
                                <hardwareVersions>
                                                <hardwareVersion>GS</hardwareVersion>
                                </hardwareVersions>
                                <fileName>gecosense/GECOSENS-Application-v001.004.bin</fileName>
                                <versionName>v001.004</versionName>
                                <firmId1>0x03</firmId1>
                                <firmId2>0x03</firmId2>
                                <version>0x01</version>
                                <subVersion>0x04</subVersion>
                                <checkSum1>0xED</checkSum1>
                                <checkSum2>0x5D</checkSum2>
                </firmwareUpdate>
        </firmwareItems>
</Config>

Re: Warmte uitlezen

Posted: Sun Feb 10, 2019 1:15 pm
by marcelr
Dank je, da's dan niet anders dan bij een "gas en elektra" toon.

's Kijken of ik een 4700 meteradapter kan omkatten naar een 4900....
All times are UTC+02:00
Page 3 of 3

Powered by phpBB® Forum Software © phpBB Limited