Home Automation Domotica Forum Europe, Bwired Forum

Ron

Switching manually from the command prompt takes a bout a second or 2 to take effect, I learned last thursday while testing multiple actions.

I will try your script en publish the result.

Regards Olaf

Hi Ron

I typed the script (used gedit, couln't get my head around VI) and ran it.

A1 is switched off and back on again, same for C1 (the lights where on when I fired the script)

So to conclude: that worked like a charm. Each command took around 2 seconds, as with use of the a manual command prompt.

I don't want to add to your workload, so don't make the Q job a priority!

Thanks for the support

Regards
Olaf

I have implemented the queue, so you can download the new code and try it.
It's just a few lines of code.
You can also just copy over X10Cmd.module and recompile if you want.

Thanks Ron, that is very quick. I will test it.

Have to solve a problem with accessing the CM15a first. After an Ubuntu update it fails, even from the command prompt.

Regards

Olaf

Hi Ron,

Great job, I can now switch 2 devices with one event sequentially. Thanks for your support on this old X10 stuff
I'm preparing to introduce KaKu to phase out X10 later, but that will take some time...

Regards
Olaf