Home Automation Domotica Forum Europe, Bwired Forum

gijsje wrote:If i go to /happ_thermstat?action=printTableInfo it only gives me 0 on all values.
If i go to /hcb_rrd/ReadRRD.html it says 404 not found.

If i look at the toon i does see it is otgw boiler but i also says it can not connect to the boiler
Is there something else t check to get this to work?

{"sampleTime":"22-01-2018 15:55:00","boilerSetpoint":0,"roomTempSetpoint":22,"boilerPressure":0,"roomTemp":21.63,"boilerOutTemp":0,"boilerInTemp":0,"boilerModulationLevel":35}

{"sampleTime":"22-01-2018 16:18:00","boilerSetpoint":42.66,"roomTempSetpoint":22,"boilerPressure":0,"roomTemp":21.71,"boilerOutTemp":45,"boilerInTemp":44,"boilerModulationLevel":0}

Hypermobile wrote:Adjusted somebody elses Script to get it to work with this new app:

It's for Domoticz:
1) make 5 UV_variables in domoticz
UV_ToonIP => {STRING} =192.168.x.x
UV_DomoticzIP => {STRING} = 192.168.x.x
UV_ToonboilerInTempName => {STRING} = BoilerInletTemp
UV_ToonboilerOutTempName => {STRING} = BoilerOutletTemp
UV_BoilerPressure => {STRINT} = BoilerPressure

2) Create 3 dummy sensor; with Name BoilerInletTemp, BoilerOutletTemp, BoilerPressure

3) Create a LUA TIME Event copy paste script.

Code: Select all

-- Time script runs every minute, intended to sync Domoticz with Toon in case the value is changed on the physical device.
-- Updates Toon ToonboilerOutTempName Sensor to value set on Toon
-- Updates Toon ToonboilerInTempName Sensor to value set on Toon
-- Updates Toon ToonboilerPressure sensor to value set on Toon 

commandArray = {}
    
    ToonboilerInTempName = uservariables['UV_ToonboilerInTempName'] -- Sensor inlet temperature
    ToonboilerOutTempName = uservariables['UV_ToonboilerOutTempName'] -- Sensor outlet temperature
    ToonboilerPressure  =   uservariables['UV_ToonboilerPressure'] -- ToonboilerPressure
    
  	ToonIP = uservariables['UV_ToonIP']
    DomoticzIP = uservariables['UV_DomoticzIP']

    json = assert(loadfile "/usr/local/domoticz/var/scripts/lua/JSON.lua")()  -- For Synology
    
local handle = assert(io.popen(string.format('curl http://%s/boilerstatus/boilervalues.txt', ToonIP)))
   local BoilerInfo = handle:read('*all')
handle:close()

-- JSON data from Toon contains a extra "," which should not be there.
BoilerInfo = string.gsub(BoilerInfo, ",}", "}")

jsonBoilerInfo = json:decode(BoilerInfo)
    
    currentboilerInTemp = tonumber(jsonBoilerInfo.boilerInTemp)
    currentboilerOutTemp = tonumber(jsonBoilerInfo.boilerOutTemp)
    currentboilerPressure = tonumber(jsonBoilerInfo.boilerPressure)
   
    -- Update the boilerInTemp
    if otherdevices_svalues[ToonboilerInTempName]*100 ~= currentboilerInTemp*100 then  
        print('Updating boiler inlet temp to new value: ' ..currentboilerInTemp)
        commandArray[1] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonboilerInTempName], currentboilerInTemp)}
    end
    
    -- Update the boilerOutTemp
    if otherdevices_svalues[ToonboilerOutTempName]*100 ~= currentboilerOutTemp*100 then 
        print('Updating boiler outlet temp to new value: ' ..currentboilerOutTemp)
        commandArray[2] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonboilerOutTempName], currentboilerOutTemp)}
    end

    -- Update the boilerPressure
    if otherdevices_svalues[ToonboilerPressure]*100 ~= currentboilerPressure*100 then 
        print('Updating boiler pressure to new value: ' ..currentboilerPressure)
        commandArray[3] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonboilerPressure], currentboilerPressure)}
    end

return commandArray

---EDITTED: added Pressure measurement
---EDITTED: added *100 to let the IF THEN work Correct

Hypermobile wrote:Adjusted somebody elses Script to get it to work with this new app:

It's for Domoticz:
1) make 5 UV_variables in domoticz
UV_ToonIP => {STRING} =192.168.x.x
UV_DomoticzIP => {STRING} = 192.168.x.x
UV_ToonboilerInTempName => {STRING} = BoilerInletTemp
UV_ToonboilerOutTempName => {STRING} = BoilerOutletTemp
UV_BoilerPressure => {STRINT} = BoilerPressure

2) Create 3 dummy sensor; with Name BoilerInletTemp, BoilerOutletTemp, BoilerPressure

3) Create a LUA TIME Event copy paste script.

Code: Select all

-- Time script runs every minute, intended to sync Domoticz with Toon in case the value is changed on the physical device.
-- Updates Toon ToonboilerOutTempName Sensor to value set on Toon
-- Updates Toon ToonboilerInTempName Sensor to value set on Toon
-- Updates Toon ToonboilerPressure sensor to value set on Toon 

commandArray = {}
    
    ToonboilerInTempName = uservariables['UV_ToonboilerInTempName'] -- Sensor inlet temperature
    ToonboilerOutTempName = uservariables['UV_ToonboilerOutTempName'] -- Sensor outlet temperature
    ToonboilerPressure  =   uservariables['UV_ToonboilerPressure'] -- ToonboilerPressure
    
  	ToonIP = uservariables['UV_ToonIP']
    DomoticzIP = uservariables['UV_DomoticzIP']

    json = assert(loadfile "/usr/local/domoticz/var/scripts/lua/JSON.lua")()  -- For Synology
    
local handle = assert(io.popen(string.format('curl http://%s/boilerstatus/boilervalues.txt', ToonIP)))
   local BoilerInfo = handle:read('*all')
handle:close()

-- JSON data from Toon contains a extra "," which should not be there.
BoilerInfo = string.gsub(BoilerInfo, ",}", "}")

jsonBoilerInfo = json:decode(BoilerInfo)
    
    currentboilerInTemp = tonumber(jsonBoilerInfo.boilerInTemp)
    currentboilerOutTemp = tonumber(jsonBoilerInfo.boilerOutTemp)
    currentboilerPressure = tonumber(jsonBoilerInfo.boilerPressure)
   
    -- Update the boilerInTemp
    if otherdevices_svalues[ToonboilerInTempName]*100 ~= currentboilerInTemp*100 then  
        print('Updating boiler inlet temp to new value: ' ..currentboilerInTemp)
        commandArray[1] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonboilerInTempName], currentboilerInTemp)}
    end
    
    -- Update the boilerOutTemp
    if otherdevices_svalues[ToonboilerOutTempName]*100 ~= currentboilerOutTemp*100 then 
        print('Updating boiler outlet temp to new value: ' ..currentboilerOutTemp)
        commandArray[2] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonboilerOutTempName], currentboilerOutTemp)}
    end

    -- Update the boilerPressure
    if otherdevices_svalues[ToonboilerPressure]*100 ~= currentboilerPressure*100 then 
        print('Updating boiler pressure to new value: ' ..currentboilerPressure)
        commandArray[3] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonboilerPressure], currentboilerPressure)}
    end

return commandArray

---EDITTED: added Pressure measurement
---EDITTED: added *100 to let the IF THEN work Correct

gielie wrote:

Hypermobile wrote:Adjusted somebody elses Script to get it to work with this new app:

It's for Domoticz:
1) make 5 UV_variables in domoticz
UV_ToonIP => {STRING} =192.168.x.x
UV_DomoticzIP => {STRING} = 192.168.x.x
UV_ToonboilerInTempName => {STRING} = BoilerInletTemp
UV_ToonboilerOutTempName => {STRING} = BoilerOutletTemp
UV_BoilerPressure => {STRINT} = BoilerPressure

2) Create 3 dummy sensor; with Name BoilerInletTemp, BoilerOutletTemp, BoilerPressure

3) Create a LUA TIME Event copy paste script.

Code: Select all

-- Time script runs every minute, intended to sync Domoticz with Toon in case the value is changed on the physical device.
-- Updates Toon ToonboilerOutTempName Sensor to value set on Toon
-- Updates Toon ToonboilerInTempName Sensor to value set on Toon
-- Updates Toon ToonboilerPressure sensor to value set on Toon 

commandArray = {}
    
    ToonboilerInTempName = uservariables['UV_ToonboilerInTempName'] -- Sensor inlet temperature
    ToonboilerOutTempName = uservariables['UV_ToonboilerOutTempName'] -- Sensor outlet temperature
    ToonboilerPressure  =   uservariables['UV_ToonboilerPressure'] -- ToonboilerPressure
    
  	ToonIP = uservariables['UV_ToonIP']
    DomoticzIP = uservariables['UV_DomoticzIP']

    json = assert(loadfile "/usr/local/domoticz/var/scripts/lua/JSON.lua")()  -- For Synology
    
local handle = assert(io.popen(string.format('curl http://%s/boilerstatus/boilervalues.txt', ToonIP)))
   local BoilerInfo = handle:read('*all')
handle:close()

-- JSON data from Toon contains a extra "," which should not be there.
BoilerInfo = string.gsub(BoilerInfo, ",}", "}")

jsonBoilerInfo = json:decode(BoilerInfo)
    
    currentboilerInTemp = tonumber(jsonBoilerInfo.boilerInTemp)
    currentboilerOutTemp = tonumber(jsonBoilerInfo.boilerOutTemp)
    currentboilerPressure = tonumber(jsonBoilerInfo.boilerPressure)
   
    -- Update the boilerInTemp
    if otherdevices_svalues[ToonboilerInTempName]*100 ~= currentboilerInTemp*100 then  
        print('Updating boiler inlet temp to new value: ' ..currentboilerInTemp)
        commandArray[1] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonboilerInTempName], currentboilerInTemp)}
    end
    
    -- Update the boilerOutTemp
    if otherdevices_svalues[ToonboilerOutTempName]*100 ~= currentboilerOutTemp*100 then 
        print('Updating boiler outlet temp to new value: ' ..currentboilerOutTemp)
        commandArray[2] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonboilerOutTempName], currentboilerOutTemp)}
    end

    -- Update the boilerPressure
    if otherdevices_svalues[ToonboilerPressure]*100 ~= currentboilerPressure*100 then 
        print('Updating boiler pressure to new value: ' ..currentboilerPressure)
        commandArray[3] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonboilerPressure], currentboilerPressure)}
    end

return commandArray

---EDITTED: added Pressure measurement
---EDITTED: added *100 to let the IF THEN work Correct

The script works great, accept the pressure because i dont have that value.
Could you add the other parameters to the script like %modulation?
I tried it myself but it doesnt work, i replaced the pressure items for the Modulation parts with no luck.

-- Time script runs every minute, intended to sync Domoticz with Toon in case the value is changed on the physical device.
-- Updates Toon Thermostat Sensor to value set on Toon
-- Updates Toon Temperature Sensor to value set on Toon
-- Updates Toon Scenes switch based on program set on Toon
-- Updates Toon Auto Program switch to value set on Toon
-- Updates Toon program information text to value set on Toon
-- Updates Toon Burner status in order to see in domoticz if tyou boiler is on for the hotwater or heating or off (still is a undefined number which i must hunt down)

commandArray = {}

    ToonThermostatSensorName = uservariables['UV_ToonThermostatSensorName'] -- Sensor showing current setpoint
    ToonTemperatureSensorName = uservariables['UV_ToonTemperatureSensorName'] -- Sensor showing current room temperature
    ToonScenesSensorName  = uservariables['UV_ToonScenesSensorName'] -- Sensor showing current program
    ToonAutoProgramSensorName = uservariables['UV_ToonAutoProgramSensorName'] -- Sensor showing current auto program status
	ToonBurnerName = uservariables['UV_ToonBurnerName']
	ToonProgramInformationSensorName = uservariables['UV_ToonProgramInformationSensorName'] -- Sensor showing displaying program information status
	TooncurrentModulationLevel = uservariables['UV_TooncurrentModulationLevel'] -- Sensor showing displaying Current modulation leven
	ToonInternalBoilerSetpoint = uservariables['UV_ToonInternalBoilerSetpoint']
	ToonIP = uservariables['UV_ToonIP']
    DomoticzIP = uservariables['UV_DomoticzIP']

    json = assert(loadfile "/usr/local/domoticz/var/scripts/lua/JSON.lua")()  -- For Synology
    
local handle = assert(io.popen(string.format('curl http://%s/happ_thermstat?action=getThermostatInfo', ToonIP)))
   local ThermostatInfo = handle:read('*all')
handle:close()

if(ThermostatInfo ~= "") then

-- JSON data from Toon contains a extra "," which should not be there.
ThermostatInfo = string.gsub(ThermostatInfo, ",}", "}")

jsonThermostatInfo = json:decode(ThermostatInfo)
    
    currentSetpoint = tonumber(jsonThermostatInfo.currentSetpoint) / 100
    currentTemperature = tonumber(jsonThermostatInfo.currentTemp) / 100
    currentProgramState = tonumber(jsonThermostatInfo.programState)
    currentActiveState = tonumber(jsonThermostatInfo.activeState)
    currentNextTime = jsonThermostatInfo.nextTime
	currentBurnerInfo = tonumber(jsonThermostatInfo.burnerInfo)
    currentNextSetPoint = tonumber(jsonThermostatInfo.nextSetpoint) / 100
    currentModulationLevel = tonumber(jsonThermostatInfo.currentModulationLevel)
    currentInternalBoilerSetpoint = tonumber(jsonThermostatInfo.currentInternalBoilerSetpoint)
    
    -- Update the thermostat sensor to current setpoint
    if otherdevices_svalues[ToonThermostatSensorName]*100 ~= currentSetpoint*100 then  
        print('Updating thermostat sensor to new set point: ' ..currentSetpoint)
        commandArray[1] = {['Variable:UV_ToonChangedByDomoticz'] = '1'} -- Set variable changed to 1 to prevent script ToonSetPoint from shooting an event at Toon
        commandArray[2] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonThermostatSensorName], currentSetpoint)}
    end
    
    -- Update the temperature sensor to current room temperature
    if otherdevices_svalues[ToonTemperatureSensorName]*100 ~= currentTemperature*100 then 
        print('Updating the temperature sensor to new value: ' ..currentTemperature)
        commandArray[3] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonTemperatureSensorName], currentTemperature)}
    end
    
    -- Update the toon scene selector sensor to current program state
    CurrentToonScenesSensorValue = otherdevices_svalues[ToonScenesSensorName]
    
    if currentActiveState == -1 then currentActiveState = '50' -- Manual
    elseif currentActiveState == 0 then currentActiveState = '40' -- Comfort
    elseif currentActiveState == 1 then currentActiveState = '30' -- Home
    elseif currentActiveState == 2 then currentActiveState = '20' -- Sleep
    elseif currentActiveState == 3 then currentActiveState = '10' -- Away
    end
    
    if CurrentToonScenesSensorValue ~= currentActiveState then  -- Update toon selector if it has changed
        print ('Updating Toon Scenes selector')
        commandArray[4] = {['UpdateDevice'] = string.format('%s|1|%s', otherdevices_idx[ToonScenesSensorName], currentActiveState)}
    end
    
    -- Updates the toon auto program switch 
    CurrentToonAutoProgramSensorValue = otherdevices_svalues[ToonAutoProgramSensorName]
    
    if currentProgramState == 0 then currentProgramState = '10' -- No
    elseif currentProgramState == 1 then currentProgramState = '20' -- Yes
    elseif currentProgramState == 2 then currentProgramState = '30' -- Temporary       
    end
    
    if CurrentToonAutoProgramSensorValue ~= currentProgramState then -- Update toon auto program selector if it has changed
        print ('Updating Toon Auto Program selector')
        commandArray[5] = {['UpdateDevice'] = string.format('%s|1|%s', otherdevices_idx[ToonAutoProgramSensorName], currentProgramState)}
    end
    
    -- Updates the toon program information text box
    CurrentToomProgramInformationSensorValue = otherdevices_svalues[ToonProgramInformationSensorName]
    if currentNextTime == 0 or currentNextSetPoint == 0 then
        ToonProgramInformationSensorValue = 'Op ' ..currentSetpoint.. '°'
    else
        ToonProgramInformationSensorValue = 'Om ' ..os.date('%H:%M', currentNextTime).. ' op ' ..currentNextSetPoint.. '°'
    end
    
    if CurrentToomProgramInformationSensorValue ~= ToonProgramInformationSensorValue then
        commandArray[6] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonProgramInformationSensorName], ToonProgramInformationSensorValue)}
    end
	
 -- Update the toon burner selector to current program state
    CurrentToonBurnerValue = otherdevices_svalues[ToonBurnerName]  
	

	if currentBurnerInfo == 0 then currentBurnerInfo = '0' -- uit
    elseif currentBurnerInfo == 1 then currentBurnerInfo = '10' -- cv aan
    elseif currentBurnerInfo == 2 then currentBurnerInfo = '20' -- warmwater aan
    end
    
    if CurrentToonBurnerValue ~= currentBurnerInfo then  -- Update toon burner selector if it has changed
        print ('Updating Toon burner info')
        commandArray[7] = {['UpdateDevice'] = string.format('%s|1|%s', otherdevices_idx[ToonBurnerName], currentBurnerInfo)}
    end
	

 -- Update the modulation level of the burner  
 
    if otherdevices_svalues[TooncurrentModulationLevel]+1 ~= currentModulationLevel+1 then 
        print('Updating the ModulationLevel to new value: ' ..currentModulationLevel)
        commandArray[8] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[TooncurrentModulationLevel], currentModulationLevel)}
    end
        
      -- Update the Internal Setpoint of the boiler  
    if otherdevices_svalues[ToonInternalBoilerSetpoint]+1 ~= currentInternalBoilerSetpoint+1 then 
        print('Updating the currentInternalBoilerSetpoint to new value: ' ..currentInternalBoilerSetpoint)
        commandArray[9] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonInternalBoilerSetpoint], currentInternalBoilerSetpoint)}
    end 
    
else
print ('Geen data terug')
end    
        
return commandArray

Hypermobile wrote:Minor issue:

IPTOON/boilerstatus/boilervalues.txt AFTER a FULL reboot

Code: Select all

"roomTempSetpoint":null,"boilerPressure":null

Pushed Comfort;

Code: Select all

"roomTempSetpoint":20.5,"boilerPressure":null

so after a Reboot; RoomTempSetpoint needs to change to be able to see it in the Boilervalues.txt

Also noticed that Boiler Pressure is now "NULL" or "NaN"
That was definitely 0.0 yesterday.

Hypermobile wrote:
Current Setpoint
Current temp
Current programstate
Burner info
Modulation level;
Next setpoint.

I grab those from another IPTOON/happ_thermstat?action=getThermostatInfo
The BoilerStatus grabs Modulation levels; also from this location;
So i thought it's more usefull to get it at it's source

Check allso this Forum
https://www.domoticz.com/forum/viewtopic.php?t=11421

This is my LUA TIME EVENT:

You Need to create a WHole Bunch of USER Variables. to get it to work

Code: Select all

-- Time script runs every minute, intended to sync Domoticz with Toon in case the value is changed on the physical device.
-- Updates Toon Thermostat Sensor to value set on Toon
-- Updates Toon Temperature Sensor to value set on Toon
-- Updates Toon Scenes switch based on program set on Toon
-- Updates Toon Auto Program switch to value set on Toon
-- Updates Toon program information text to value set on Toon
-- Updates Toon Burner status in order to see in domoticz if tyou boiler is on for the hotwater or heating or off (still is a undefined number which i must hunt down)

commandArray = {}

    ToonThermostatSensorName = uservariables['UV_ToonThermostatSensorName'] -- Sensor showing current setpoint
    ToonTemperatureSensorName = uservariables['UV_ToonTemperatureSensorName'] -- Sensor showing current room temperature
    ToonScenesSensorName  = uservariables['UV_ToonScenesSensorName'] -- Sensor showing current program
    ToonAutoProgramSensorName = uservariables['UV_ToonAutoProgramSensorName'] -- Sensor showing current auto program status
	ToonBurnerName = uservariables['UV_ToonBurnerName']
	ToonProgramInformationSensorName = uservariables['UV_ToonProgramInformationSensorName'] -- Sensor showing displaying program information status
	TooncurrentModulationLevel = uservariables['UV_TooncurrentModulationLevel'] -- Sensor showing displaying Current modulation leven
	ToonInternalBoilerSetpoint = uservariables['UV_ToonInternalBoilerSetpoint']
	ToonIP = uservariables['UV_ToonIP']
    DomoticzIP = uservariables['UV_DomoticzIP']

    json = assert(loadfile "/usr/local/domoticz/var/scripts/lua/JSON.lua")()  -- For Synology
    
local handle = assert(io.popen(string.format('curl http://%s/happ_thermstat?action=getThermostatInfo', ToonIP)))
   local ThermostatInfo = handle:read('*all')
handle:close()

if(ThermostatInfo ~= "") then

-- JSON data from Toon contains a extra "," which should not be there.
ThermostatInfo = string.gsub(ThermostatInfo, ",}", "}")

jsonThermostatInfo = json:decode(ThermostatInfo)
    
    currentSetpoint = tonumber(jsonThermostatInfo.currentSetpoint) / 100
    currentTemperature = tonumber(jsonThermostatInfo.currentTemp) / 100
    currentProgramState = tonumber(jsonThermostatInfo.programState)
    currentActiveState = tonumber(jsonThermostatInfo.activeState)
    currentNextTime = jsonThermostatInfo.nextTime
	currentBurnerInfo = tonumber(jsonThermostatInfo.burnerInfo)
    currentNextSetPoint = tonumber(jsonThermostatInfo.nextSetpoint) / 100
    currentModulationLevel = tonumber(jsonThermostatInfo.currentModulationLevel)
    currentInternalBoilerSetpoint = tonumber(jsonThermostatInfo.currentInternalBoilerSetpoint)
    
    -- Update the thermostat sensor to current setpoint
    if otherdevices_svalues[ToonThermostatSensorName]*100 ~= currentSetpoint*100 then  
        print('Updating thermostat sensor to new set point: ' ..currentSetpoint)
        commandArray[1] = {['Variable:UV_ToonChangedByDomoticz'] = '1'} -- Set variable changed to 1 to prevent script ToonSetPoint from shooting an event at Toon
        commandArray[2] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonThermostatSensorName], currentSetpoint)}
    end
    
    -- Update the temperature sensor to current room temperature
    if otherdevices_svalues[ToonTemperatureSensorName]*100 ~= currentTemperature*100 then 
        print('Updating the temperature sensor to new value: ' ..currentTemperature)
        commandArray[3] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonTemperatureSensorName], currentTemperature)}
    end
    
    -- Update the toon scene selector sensor to current program state
    CurrentToonScenesSensorValue = otherdevices_svalues[ToonScenesSensorName]
    
    if currentActiveState == -1 then currentActiveState = '50' -- Manual
    elseif currentActiveState == 0 then currentActiveState = '40' -- Comfort
    elseif currentActiveState == 1 then currentActiveState = '30' -- Home
    elseif currentActiveState == 2 then currentActiveState = '20' -- Sleep
    elseif currentActiveState == 3 then currentActiveState = '10' -- Away
    end
    
    if CurrentToonScenesSensorValue ~= currentActiveState then  -- Update toon selector if it has changed
        print ('Updating Toon Scenes selector')
        commandArray[4] = {['UpdateDevice'] = string.format('%s|1|%s', otherdevices_idx[ToonScenesSensorName], currentActiveState)}
    end
    
    -- Updates the toon auto program switch 
    CurrentToonAutoProgramSensorValue = otherdevices_svalues[ToonAutoProgramSensorName]
    
    if currentProgramState == 0 then currentProgramState = '10' -- No
    elseif currentProgramState == 1 then currentProgramState = '20' -- Yes
    elseif currentProgramState == 2 then currentProgramState = '30' -- Temporary       
    end
    
    if CurrentToonAutoProgramSensorValue ~= currentProgramState then -- Update toon auto program selector if it has changed
        print ('Updating Toon Auto Program selector')
        commandArray[5] = {['UpdateDevice'] = string.format('%s|1|%s', otherdevices_idx[ToonAutoProgramSensorName], currentProgramState)}
    end
    
    -- Updates the toon program information text box
    CurrentToomProgramInformationSensorValue = otherdevices_svalues[ToonProgramInformationSensorName]
    if currentNextTime == 0 or currentNextSetPoint == 0 then
        ToonProgramInformationSensorValue = 'Op ' ..currentSetpoint.. '°'
    else
        ToonProgramInformationSensorValue = 'Om ' ..os.date('%H:%M', currentNextTime).. ' op ' ..currentNextSetPoint.. '°'
    end
    
    if CurrentToomProgramInformationSensorValue ~= ToonProgramInformationSensorValue then
        commandArray[6] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonProgramInformationSensorName], ToonProgramInformationSensorValue)}
    end
	
 -- Update the toon burner selector to current program state
    CurrentToonBurnerValue = otherdevices_svalues[ToonBurnerName]  
	

	if currentBurnerInfo == 0 then currentBurnerInfo = '0' -- uit
    elseif currentBurnerInfo == 1 then currentBurnerInfo = '10' -- cv aan
    elseif currentBurnerInfo == 2 then currentBurnerInfo = '20' -- warmwater aan
    end
    
    if CurrentToonBurnerValue ~= currentBurnerInfo then  -- Update toon burner selector if it has changed
        print ('Updating Toon burner info')
        commandArray[7] = {['UpdateDevice'] = string.format('%s|1|%s', otherdevices_idx[ToonBurnerName], currentBurnerInfo)}
    end
	

 -- Update the modulation level of the burner  
 
    if otherdevices_svalues[TooncurrentModulationLevel]+1 ~= currentModulationLevel+1 then 
        print('Updating the ModulationLevel to new value: ' ..currentModulationLevel)
        commandArray[8] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[TooncurrentModulationLevel], currentModulationLevel)}
    end
        
      -- Update the Internal Setpoint of the boiler  
    if otherdevices_svalues[ToonInternalBoilerSetpoint]+1 ~= currentInternalBoilerSetpoint+1 then 
        print('Updating the currentInternalBoilerSetpoint to new value: ' ..currentInternalBoilerSetpoint)
        commandArray[9] = {['UpdateDevice'] = string.format('%s|0|%s', otherdevices_idx[ToonInternalBoilerSetpoint], currentInternalBoilerSetpoint)}
    end 
    
else
print ('Geen data terug')
end    
        
return commandArray

Rudolf wrote:For those with Home Assistant this might be helpful:

sensors.yaml

Code: Select all

- platform: rest
  name: Boiler Status
  json_attributes:
    - sampleTime
    - boilerSetpoint
    - roomTempSetpoint
    - boilerPressure
    - roomTemp
    - boilerOutTemp
    - boilerInTemp
    - boilerModulationLevel
  resource: http://toon/boilerstatus/boilervalues.txt
  value_template: '{{ value_json.sampleTime }}'

- platform: template
  sensors:
    sampleTime:
      friendly_name: 'SampleTime'
      value_template: '{{ states.sensor.boiler_status.attributes["sampleTime"] }}'