micro in wall modules practical connections
Posted: Sun Jan 11, 2015 1:07 pm
Hi
I'd love to have your thoughts on the following topics:
1. It is very unpractical to wire everything on these in wall modules with 2.5mm² wire, so therefor my thoughts on how to make this more practical.
(Fibaro double in wall switch as example)
thick line would be 2.5mm²
thin line would be .25~.50mm²
all wires: 230V~
fuse on that loop is 16A
But is it technically (safety, fire, ...) and electrical (electricity certificate) - ok ?? (my country Belgium)
2. Is there anything else I should consider for the electricity certification when I install home automation (mainly in wall modules) (except the regular electrical stuff obvious) ??
Thx for reading, many thx for answering
I'd love to have your thoughts on the following topics:
1. It is very unpractical to wire everything on these in wall modules with 2.5mm² wire, so therefor my thoughts on how to make this more practical.
(Fibaro double in wall switch as example)
thick line would be 2.5mm²
thin line would be .25~.50mm²
all wires: 230V~
fuse on that loop is 16A
But is it technically (safety, fire, ...) and electrical (electricity certificate) - ok ?? (my country Belgium)
2. Is there anything else I should consider for the electricity certification when I install home automation (mainly in wall modules) (except the regular electrical stuff obvious) ??
Thx for reading, many thx for answering