Home Automation Domotica Forum Europe, Bwired Forum

Hi, every time there has been a power-break the ip-adddress of the RFXcom Lan is changed resulting in HS3 not finding the RFXcom ip=address any-more.
Having had this several times the past few years, I thought now it is finely time to fix this (if possible). Can this be done though the RFXLAN configuration page?
Only thing is I can not log in there... what are the standard login settings (can they be reset? without having to configure everything again!).

Would be a major improvement for the system having a fixed ip-address.

the RFXCOM LAN settings:
VERSIONS:
Web pages: RFXLAN_0_02.web
Firmware: RFXLAN_0_06.hex
Stack Version: v5.31
Build Date: May 21 2011 12:08:53

Wiechert.

Just set the dhcp address to be static for that device on your modem (If your modem supports this)

Ok thanks, I will have a look at that. I know the D-link router will support that but have not don that before on my DIR-868L. So let's find out how to do that

Wiechert.

Ok this seems to work. I'm not sure if this is what you meant? But added the RFXCOM Lan to he DHCP Reservation List

Add DHCP Reservation
Enable : x
Computer Name :
IP Address :
MAC Address :

So next I will try what happens when I have a power break.
I am reconnecting the electric wiring of an espresso machine I try to repair... which will cause that for sure

Yup thats it

Ok I performed a "cold restart" simulating a power-break and it worked nicely. Thanks for the help.

And use RFXLAN:10001 for the receiver and RFXLAN:10002 for the RFXmitter in the HS3 plug-in instead of an IP address.
See also chapter 5.4 and 5.5 in the RFXCOM HS3 User Guide