Team,
Moving away from X10 I would like to use a Z-Wave module to control my ventilation system.
Module: Fibaro FGS-222 (2x 1.5kW relay switch)
Schematics:
Connected: L3+... = low ventilation (always on)
Connected: L3+L2 = medium ventilation (don't care about this)
Connected: L3+L1 = high ventilation
- Output Q1 is used to add 'live' feed to L1 of the ventilation system.
- Now L3+L1 are connected resulting in high-ventilation
Q: Does this look right to you?
Ventilation control - now with Z-Wave
Re: Ventilation control - now with Z-Wave
I`m using it in the same way but with a Duwi Switch (because we only need one contact for L1) and in this way i also have local control on the other hand u can also add L3 to the relay module to completely switch of the ventilation in case off ........... Because it can
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: Ventilation control - now with Z-Wave
Never thought of that
Tnx for the info
Tnx for the info