Home Automation Domotica Forum Europe, Bwired Forum

Hi,

I'm still using HS2. Because I didn't maintain my configuration for the last year(s) I'm slowly losing functionality. My current HS2 configuration is dying
So, action needs to be taken.

What's your opinion about this?
- Stay at HS2
- Upgrade to HS3 (seems to be the easiest but also expensive way)
- Move to another platform (which one would you suggest......??)

I've looked at openHAB but that seems to be quite complex (I'm not a programmer)

Look forward to hear your thoughts!

Depends on what your doing, i used to be all into HS2, then moved over to fibaro. You have to pay a few bucks extra but then most is out of the box and easy to understand. Also no need to design your phone/pad interface, it just comes with it standard. I just don't have the time to "tune/tweak" it that much more.

Can you explain why you are loosing functionality?

Most systems need some kind of maintenance to keep them working.
For example:
The supplier of the weather data (weathercom) in my HSTouch design stopped pushing the data. Result: blank spots on my touchscreens
A few switches stopped working and need to be replaced
Some Oregon temp sensors need new batteries, others have new batteries but aren't received by the rfxcom anymore

Conc: I need to maintain the system and fix the broken issues. This seems a good moment (just spending the time once) to see if I will spend my time in the current setup or move to another solution.

I'm in the same situation, 4-year user of HS2 and contemplating if I should move to HS3.

I would love to move to Fibaro or Vera or some other 'modern' HA system with more user friendly functionality. But I think I can't.
In my HS2 configuration I also non Z-wave sensors/devices which (to my knowledge) can't be plugged into a Fibaro or Vera.

For example, these devices are hooked into HS2 and can (probably) be hooked into HS3, but not Fibaro
1. My gate + gate sensors via IPPower
2. My alarm system sensors (Visonic 868 mhz) via a RFXCOM device (rfxlan)
3. My router Fritzbox via a plugin
4. My Sonos system via a plugin

Olof

I chose to upgrade from HS2 to HS3 because i can create my own HSTouch interfaces. I have tried other systems like Domoticz / Domotiga / OpenHAB but they are more difficult to setup or are missing features / plugins i intended to use

Herbus wrote:Most systems need some kind of maintenance to keep them working.
For example:
The supplier of the weather data (weathercom) in my HSTouch design stopped pushing the data. Result: blank spots on my touchscreens
A few switches stopped working and need to be replaced
Some Oregon temp sensors need new batteries, others have new batteries but aren't received by the rfxcom anymore

Conc: I need to maintain the system and fix the broken issues. This seems a good moment (just spending the time once) to see if I will spend my time in the current setup or move to another solution.

Without being rude here but the issue you mention aren't issues related to HS2, HS3 of any other domotica system. New batteries for Oregon sensors will happen with HS3, Domotiga, Fibaro ect. too. HS2 is working oke but you have issues with the peripherals.

Thanks for your reply AshaiRey, great help to make the right choice

Pls take a sec to read the conclusion:

Conc: I need to maintain the system and fix the broken issues. This seems a good moment (just spending the time once) to see if I will spend my time in the current setup or move to another solution.

I switched from hs2 to hs3 more than a year ago. They have a conversiontool which helps. But it still took a lot of time. I used jonn00 his hs2-hs3 connector and that helped me to avoid a big bang transfer. I had minimal downtime.

Hs3 works, in my opinion, more stabler than hs2. I'm not fond of the interface, but there is no need to use it that often. Hs3 gets maintained and fibaro is working fine now. Rfxcom works fine (has nice feature for easy upgrade). I don't like hs touch, to much hassle to create screens for multiple devices. I use a homemade webbased interface. Works fine with the json interface hs3 offers. On the hs forum you find a windows tile like solution wposner made. It looks nice. But, most important. Hs has a nice userbase and forum which helped me to solve a lot issues.

I doubted between fibaro and hs3. But when I read the fibaro forum I decided in favor of hs3. Hs support and user base looked better and there where some horrorstories about the fibaro device on their forum.

I'm typing this on my mobile so I won't make it a long story.
If you have specific questions I can answer them.

Verstuurd vanaf mijn M6752 met Tapatalk

Although i`m having some issues with fibaro devices in HS3. Most of the house is working fine and indeed stable I`m now waiting for all the scripts i used on HS2 to be converted to HS3 by their creator for example

- ZMC (XAP800) is updated to ZMCv4 and is now working in HS3
- P2000 not yet
- FritzBox caller ID not yet

So for those i`m still using HS2

My system is also still on HS2. Super stable and working fine. I also have doubts if I should switch to HS3 because no more developments on HS2. And if I switch, should I go for pro or not? In the past I paid a lot for seperate plugin's. but I will wait until next Black Friday when (I hope) prices will be cut in half.

Thanks for your thougts guys.
It looks like updating to HS3 is still the best way for me. The suggestion of black Friday is great. Can wait until November 27th.
Gives me a little time to prepare the update.

You can start on Oktober 27th using the trial key