Page 1 of 1
delayed on power switch
Posted: Thu May 15, 2008 4:36 pm
by Willem4ever
I have some power hungry devices that need to be switched on with a (random) delay after power failure. Now when power returns the load current is too high and the automatic fuse 'switches off'
delayed on power switch
Posted: Thu May 15, 2008 4:43 pm
by Snelvuur
i would assume you dont have lots of power failures no? Also depends on what types of devices your powering. Big motors? or something else?
// Erik (binkey.nl)
delayed on power switch
Posted: Thu May 15, 2008 4:57 pm
by Willem4ever
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by snelvuur</i>
<br />i would assume you dont have lots of power failures no? Also depends on what types of devices your powering. Big motors? or something else?
// Erik (binkey.nl)
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Think about normal 220 volt applicances, i just want to avoid they swicth on all at the same time.
delayed on power switch
Posted: Thu May 15, 2008 6:27 pm
by Snelvuur
Well if you use homeseer for instance, i think those things should be possible. Never seen an example like that, but i know that homeseer has a recovery process. I dont know if that includes turning on/off the last known state.
But those devices should be switched with x10 modules or something similar then.
// Erik (binkey.nl)
delayed on power switch
Posted: Thu May 15, 2008 6:39 pm
by Willem4ever
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by snelvuur</i>
<br />Well if you use homeseer for instance, i think those things should be possible. Never seen an example like that, but i know that homeseer has a recovery process. I dont know if that includes turning on/off the last known state.
But those devices should be switched with x10 modules or something similar then.
// Erik (binkey.nl)
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Not an option, should be autonomously ... or thru serial / usb