Page 1 of 1
Visonic and Zwave ( both 868Mhz problem??)
Posted: Thu May 29, 2008 12:36 pm
by Nielsy
I have almost all my lightdevices on Zwave in my house,
now I considering a alarmsystem of Visonic.
But they are on the same freq. can it be a problem?
Maybe somebody else here have Visonic and a Zwave combination?
Visonic and Zwave ( both 868Mhz problem??)
Posted: Thu May 29, 2008 12:46 pm
by Snelvuur
i cant believe this will pose a problem since that combination most certainly is used somewhere before. I know a couple of people have visionic, dont know if they tried zwave too.
// Erik (binkey.nl)
Visonic and Zwave ( both 868Mhz problem??)
Posted: Thu May 29, 2008 1:07 pm
by b_weijenberg
Z-Wave is using 868.42MHz and Visonic 868.95MHz so they don't transmit at the same frequency.
Even if they would transmit at the same frequency there would be no problem because of the protocols used.
Visonic and Zwave ( both 868Mhz problem??)
Posted: Thu May 29, 2008 1:16 pm
by Nielsy
Thanx for the info!
Now I can order a Visonic alarm system
The last zwave modules got from Marktplaats.
He did sell them because his alarmsystem was disfunction
when he installed the zwave modules, so he went back to his
old KaKu system and sell the zwave modules to me.
But anyway, Thanx for the info / advice