Honeywell Lyric T6 seems to report misleading information
Posted: Mon Mar 27, 2017 7:04 pm
Hi,
I did upload a log for the honeywell Lyric T6 thermostat (http://otgw.tclcode.com/equipment.html).
After uploading it shows that the thermostat sends ID 16 (Room setpoint) and 24 (Room temperature). In fact it does send the id's but the temperature is always 20:
In real life the temperature settings is either 15 or 19, and the real temperature varies throughout the day. Both are displayed correctly on the thermostat.
Is there anything that can be done on this, or should I open a case with Honeywell to get this straightened out?
Thanks,
Ysbrand
I did upload a log for the honeywell Lyric T6 thermostat (http://otgw.tclcode.com/equipment.html).
After uploading it shows that the thermostat sends ID 16 (Room setpoint) and 24 (Room temperature). In fact it does send the id's but the temperature is always 20:
Code: Select all
00:00:17.219676 T90181400 Write-Data Room temperature: 20.00
00:00:17.320333 B50181400 Write-Ack Room temperature: 20.00
00:00:17.756933 T10101400 Write-Data Room setpoint: 20.00
00:00:17.863631 BD0101400 Write-Ack Room setpoint: 20.00
00:01:18.576166 T90181400 Write-Data Room temperature: 20.00
00:01:18.684213 B50181400 Write-Ack Room temperature: 20.00
00:01:19.118975 T10101400 Write-Data Room setpoint: 20.00
00:01:19.227727 BD0101400 Write-Ack Room setpoint: 20.00
<SNIP>
15:01:37.199877 T90181400 Write-Data Room temperature: 20.00
15:01:37.307410 B50181400 Write-Ack Room temperature: 20.00
15:01:37.743632 T10101400 Write-Data Room setpoint: 20.00
15:01:37.850016 BD0101400 Write-Ack Room setpoint: 20.00
<SNIP>
19:00:44.419684 T90181400 Write-Data Room temperature: 20.00
19:00:44.526472 B50181400 Write-Ack Room temperature: 20.00
19:00:44.968091 T10101400 Write-Data Room setpoint: 20.00
19:00:45.069889 BD0101400 Write-Ack Room setpoint: 20.00
19:01:45.729642 T90181400 Write-Data Room temperature: 20.00
19:01:45.815472 B50181400 Write-Ack Room temperature: 20.00
19:01:46.255161 T10101400 Write-Data Room setpoint: 20.00
19:01:46.358352 BD0101400 Write-Ack Room setpoint: 20.00
Is there anything that can be done on this, or should I open a case with Honeywell to get this straightened out?
Thanks,
Ysbrand