android app TOON

[MyZ]

Can you check if you can open the url: http://[toon-ip]/hcb_config?action=getObjectConfigTree&package=happ_thermstat&internalAddress=thermostatStates
That is one of the url's the javascript in the code is using.

I'm getting a "403 - Forbidden"....

[Ierlandfan]

Code: Select all

vi/qmf/etc/qmf_release.xml (enter)

(Press i after loading)

from

Code: Select all

<hcb_web>
      
      <enforceWhitelist>1</enforceWhitelist>
      

<hcb_web>
      
      <enforceWhitelist>0</enforceWhitelist>

Press "esc" key when ready and type

Code: Select all

:wq (enter)

Type

Code: Select all

ps -w |grep light

and look for the line:
XXXXX root 12264 S /HCBv2/bin/lighttpd -D -m /HCBv2/lib/lighttpd -f /HCBv2/etc/lighttpd/lighttpd.conf
Where XXXXX is the number we want
Then type

Code: Select all

kill -9 XXXXX

(Substitute XXXXX with the number)

Then try the command again.
http://[toon-ip]/hcb_config?action=getObjectConfigTree&package=happ_thermstat&internalAddress=thermostatStates

[MyZ]

Thnx, working! Last question: At the "usage page" electricty is showing correct. Gas usage is a little bit strange:

-Showing usage in liter/uur instead of m3
-The bars are not corresponding. They are fully filled at the webpage, onnly for one third at my Toon

Any ideas how to fix this?

[TheHogNL]

Thnx, working! Last question: At the "usage page" electricty is showing correct. Gas usage is a little bit strange:

-Showing usage in liter/uur instead of m3
-The bars are not corresponding. They are fully filled at the webpage, onnly for one third at my Toon

Any ideas how to fix this?

Check your real values at http://[toon-ip]/happ_pwrusage?action=GetCurrentUsage

The bars only represent how you are doing today compared to the average. Probably indeed not like the Toon is showing.
If you want it in m3 you will need to change the javascript code in /qml/www/mobile

[MyZ]

Thnx. The only right unit for Gas is m3 right? The data for Gas isn't live data so can't have the dimension time. Check?

Maybe the average is calculated differently on Toon?

[TheHogNL]

Liters per hour could be ok if you are using gas at that time. However as smart meters only count gas once every hour this only makes sence when you use a analog gas meter.
Please remember this pease of original Toon code is very old (from the beginnings). Feel free to change the code to your needs (and share it with us ).

Check with the /happ_pwrusage?action=GetCurrentUsage url what values your Toon is getting and try to make sence and represent it correctly.

Good luck!

[MyZ]

Old but good. Just what I was looking for; simple GUI to control and a tab to see the usage.

Will give it a try when the weather gets worse And share it offcourse!

[MyZ]

Been watching /happ_pwrusage?action=GetCurrentUsage for a couple of days and here are my findings in my case (smart meter p4):

- "gasUsage" is in liters, "avgValue" is in m3. So "gasUsage" must be divided by 1000. My Toon is displaying it with two decimals. "gasUsage": {"value":89, "dayCost":1.15,"avgValue":3.77} is displayed as 0,09 m3
- liter/uur must be m3 on the /mobile/#consum page

I'm no coder.. Is there a simple way to fix this or can someone fix this?

[MyZ]

Nobody?

[spattex]

Both apps are working perfectly fine on Android 8.1 and Toon firmware 4.19.10
Like to see also Zon op Toon....