VNC acces on latest firmware

Everything about external control, apps, VNC, etc goes here.

Moderator: marcelr

Re: VNC acces on latest firmware

Postby Smiggel » Fri May 11, 2018 7:59 pm

michel30 wrote:Hello,

I run on my OSX realvnc and that works super also with the latest firmware.
I run on my Iphone and Ipad RealVNC and that works also fine.
The version that runs on my Toon is x11vnc_0.9.13-r0.


Hmmm ok. I run version x11vnc_0.9.13-r3_qb2 here. That does not work with RealVNC. I’ll see if I can find your version instead.
Smiggel
Starting Member
Starting Member
 
Posts: 28
Joined: April 2018

Re: VNC acces on latest firmware

Postby Smiggel » Fri May 11, 2018 8:27 pm

michel30 wrote:Hello,

I run on my OSX realvnc and that works super also with the latest firmware.
I run on my Iphone and Ipad RealVNC and that works also fine.
The version that runs on my Toon is x11vnc_0.9.13-r0.


Did you do anything special? I installed x11vnc_0.9.13-r0 now and still can’t connect using RealVNC. I get the error: The authentication mechanism requested cannot by provided by the computer.
Smiggel
Starting Member
Starting Member
 
Posts: 28
Joined: April 2018

Re: VNC acces on latest firmware

Postby michel30 » Sat May 12, 2018 9:48 pm

Hello,

The only thing that I removed was the encryption:

Code: Select all

vi /usr/bin/x11vnc

if you take out this line:
CODE: SELECT ALL
       -ssl SAVE -vencrypt nodh:plain:support -usepw  \



Than you will have no encryption.
michel30
Member
Member
 
Posts: 170
Joined: August 2017

Re: VNC acces on latest firmware

Postby Smiggel » Sat May 12, 2018 10:37 pm

michel30 wrote:Hello,

The only thing that I removed was the encryption:

Code: Select all

vi /usr/bin/x11vnc

if you take out this line:
CODE: SELECT ALL
       -ssl SAVE -vencrypt nodh:plain:support -usepw  \



Than you will have no encryption.


Ah check. That explains why it works on Real VNC. With the encryption enabled it doesn’t work. With the encryption disabled RealVNC works indeed.
Smiggel
Starting Member
Starting Member
 
Posts: 28
Joined: April 2018

Previous

Return to Toon external control

Who is online

Users browsing this forum: No registered users and 0 guests